Print this file, it will make life much easier.

A- Click on FILE, then OPTIONS, then SOUNDS
   1. Place a check in all boxes
   2. Fill in a valid directory of where your wavs are stored
      .i.e.  C:\wavsounds\ 
   3. Click on OK

B- Click on DCC, OPTIONS
   1. Check Auto-get and minimize, auto-accept, autoclose, etc..
   2. Change all timeouts to 9999
   3. Fill in same directory as you did in step A-2
   4. Click on OK

C- Click on Tools, Remote, Events
   1. Place a check in "Listening"
   2. Cut and paste (or type) the following lines into the Remote Events:

1:ON NOSOUND:/msg $chan ! $+ $nick $filename
1:ON TEXT:!yournick*:*:/dcc send $nick "yourdrive:\yoursounddir\" $+ $parm2 

   3. Replace "yournick" with your nickname (leave the ! and *)
   4. Change the directory to the same as in A-2 (put the \ at the end)
   5. Watch your spacing in the above in because it is very important.
   6. click on OK

D- Click File, setup, local info.
   1. Make sure your IP address is correct, if not you will not be able to
      send files. If your not sure, clear all text in the fields and check:
      "On Connect Always get IP"
   2. Click on "Identd" Put a mark in the enabled identd server check box
   3. Enter the name you use at your service provider e.g hoppy from hoppy@hus.com.au
      in th3e User ID field.
   4. Click on IRC Servers.
   5. Click on the button marked Add 
   6. Enter any name you like in the Description field
   7. Enter a sever from the list below (leave the other fields blank with the exception of the port(s)
      which should be 6667) and click on Add

      Repeat steps 5 thru 7 above for each server below
	-----------------------------------------------
	SuperChat.InnerX.Net
	irc.pitnet.net
	irc.networkx.net
	chat.cajun.net
	irc.superlink.net

   8. Click on Options 
   9. Make all the options except popup setup dialog marked
  10. retry 20 delay 20 default port 6667
  11. click on OK
  12. Click on File\setup again
  13. Click on IRC Servers again Scroll to the bottom click on one of the servers you just added
  14. Click on Connect
 
   
Sound setup in mirc
*******************************
ALIAS Setup
The following makes the sending, receiving and playing of wavs much easier.

1. Click Tools, Alias..

2. Cut and Paste (or type) the following below anything else that might 
   already be in you aliases window (spacing in this line must be exact)

/s /sound $1.wav < $1.wav > *2

3. Click OK.

WHILE ON THE CHANNEL:

To play a sound (you must have the wav in order to play it) type the
following on the command line w/o quotes "/s SOUND any text you want."
Replace "sound" with the name of the wav (no need to use .wav at end) and
type your text after it (some text must be placed at end).

Example: If I type: /s cool This is cool.
Then it would play the file cool.wav and display "This is cool" in channel.

To get a sound when you see the message "sound doesn't exist" type

!nickname filename.wav   e.g !steven helpo.wav

Replace nickname with nick of person who just played the file and filename
with the name of the file just played.

If the other person has their mIRC setup right you will automatically be
sent that file!

Remember, if after doing all this it still doesn't work  go back and
re-read and check your spacing. One extra space in command line or 
not enough spaces will keep this from working. Check your wav
directory location make sure your wavs are located there.

...and if all else fails look for Steven on channel Wav_Station sometime
and we'll take it from there

Thats it! Now go play some wavs!