# KERNELDA - Kernel Configuration for pc9801da # bu John Kohji Suguiyama # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/pc98/conf/GENERIC98,v 1.63.2.29 2000/03/16 12:04:36 nyan Exp $ # GENERIC98 -- Generic PC98 machine with WD/SCSI disks machine "pc98" #cpu "I386_CPU" cpu "I486_CPU" #cpu "I586_CPU" #cpu "I686_CPU" ident "KERNELDA" #ident "GENERIC98" maxusers 32 options "PC98" #PC98 # For Cyrix 5x86 Hyper Memory CPU on PC9801DA #options MATH_EMULATE #Support for x87 emulation #options "CYRIX_5X86" options "CPU_I486_ON_386" options "MAXMEM=65536" options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device #options EPSON_BOUNCEDMA #use bounce buufer for 15-16M #options EPSON_MEMWIN #EPSON memory window support options UCONSOLE #Allow users to grab the console #options "LINE30" options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores # # IBM-PC HDD support #options COMPAT_ATDISK config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 #controller pnp0 # PnP support for ISA #controller pci0 # Floppy drives controller fdc0 at isa? port "IO_FD1" bio irq 11 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 disk fd2 at fdc0 drive 2 #disk fd3 at fdc0 drive 3 # IDE controller and disks #options "CMD640" # work around CMD640 chip deficiency #controller wdc0 at isa? port "IO_WD1" bio irq 9 #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #disk wd2 at wdc0 drive 2 #disk wd3 at wdc0 drive 3 # ATAPI IDE CD-ROM machine #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 2 #disk wd2 at wdc0 drive 3 # # UIDE-98 provides support for IO-DATA UIDE-98 # #options "UIDE98" #controller wdc0 at isa? port "0" bio irq ? flags 0xa0ffa0ff #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "0" bio irq ? flags 0xa0ffa0ff #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 # # If you are using a internal IDE contoller too, then use config lines. # #controller wdc2 at isa? port "IO_WD1" bio irq 9 #disk wd4 at wdc2 drive 0 #disk wd5 at wdc2 drive 1 #disk wd6 at wdc2 drive 2 #disk wd7 at wdc2 drive 3 # ATAPI devices #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 # NCR/Symbios Logic #controller sym0 # NCR/Symbios Logic (do not mix with ncr, it conflicts) #controller ahc0 # AHA2940 and onboard AIC7xxx devices #controller amd0 # AMD 53C974 (Teckram DC-390(T)) #controller isp0 # Qlogic family #controller adv0 # # WD33C93 SCSI card (55/92 like board) # options BS_TARG_SAFEMODE # PC-9801-92 #controller bs0 at isa? port IO_SCSI cam irq 5 drq 3 flags 0 # SC-98 # controller bs0 at isa? port IO_SCSI cam irq 5 drq 3 flags 0x10000 # HA-55BS2 and later #controller bs0 at isa? port IO_SCSI cam irq 5 drq 3 flags 0x20000 # ELECOM type #controller bs0 at isa? port IO_SCSI cam irq 5 drq 3 flags 0x30000 # SMIT controller bs0 at isa? port IO_SCSI cam irq 9 drq 0 iomem 0xdf000 iosiz 0x1000 flags 0x40000 #controller bs0 at isa? port IO_SCSI cam irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000 # Logitec LHA-20x #controller bs0 at isa? port IO_SCSI cam irq 5 drq 3 flags 0x50000 # PC-9801-100 #controller aic0 at isa? port 0x1840 cam irq 5 flags 0x10000 # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. controller scbus0 # SCSI bus (required) device da0 # Direct Access (disks) device od0 # Optical Memory (MO etc) device sa0 # Sequential Access (tape etc) device cd0 # CD device pass0 # Passthrough device (direct SCSI) # Proprietary or custom CD-ROM Interfaces #device matcd0 at isa? port? bio # keyboard driver device pckbd0 at isa? port IO_KBD tty irq 1 #options KBD_INSTALL_CDEV device gdc0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Floating point support - do not disable. device npx0 at isa? port IO_NPX irq 8 # Power management support (see LINT for more options) #device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? # Serial (COM) ports # options COM_MULTIPORT # # COM1 device sio0 at isa? port "IO_COM1" tty irq 4 # COM2 (2nd CCU) #device sio1 at isa? port 0x238 tty irq 5 flags 0x12000000 # PC-9861K, PC-9801-101, MDC-926Rs #device sio1 at isa? port "IO_COM2" tty irq 5 flags 0x01000000 #device sio2 at isa? port "IO_COM3" tty irq 6 flags 0x02000000 # PC-9801-120 (PnP off) #device sio1 at isa? port 0x8b0 tty irq 5 flags 0x11000000 # MC-16550II, MC-RS98 #device sio1 at isa? port 0xd2 tty irq 5 flags 0x14000101 #device sio2 at isa? port 0x8d2 tty flags 0x14000101 # RSB-2000, RSB-3000, B98-02 #device sio1 at isa? port 0xb0 tty flags 0x15000101 #device sio2 at isa? port 0xb1 tty flags 0x15000101 # RSB-384 #device sio1 at isa? port 0xb0 tty flags 0x16000000 #device sio2 at isa? port 0xb1 tty flags 0x16000000 # RSA-98III device sio1 at isa? port 0x50e0 tty irq 6 flags 0x18000101 #device sio1 at isa? port 0x50e0 tty irq 5 flags 0x18000101 #device sio2 at isa? port 0x51e0 tty flags 0x18000101 # ESP98 #options COM_ESP #device sio1 at isa? port 0x18b0 tty irq 5 flags 0x19000000 device mse0 at isa? port IO_MSE tty irq 13 # NEW Parallel port device ppc0 at isa? port? tty irq 14 flags 0x40 controller ppbus0 # Parallel port bus (required) device lpt0 at ppbus? # Printer device plip0 at ppbus? # TCP/IP over parallel device ppi0 at ppbus? # Parallel port interface device #controller vpo0 at ppbus? # Requires scbus and da0 # OLD Parallel port # Please stay olpt driver after ppc driver device olpt0 at isa? port IO_LPT tty # PCI Ethernet NICs. #device al0 # ADMtek AL981 (``Comet'') #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device sf0 # Adaptec AIC-6915 DuraLAN (``Starfire'') #device sis0 # Silicon Integrated Systems SiS 900/SiS 7016 #device ste0 # Sundance ST201 (D-Link DFE-550) #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F #device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. # # DP8390 NIC # # ed0: generic driver/EtherEZ98 # ed1: LANEED LD-BDN # ed2: EGY-98 # ed3: LGY-98 # ed4: ICM-IF-2766/EN-2298-T # ed5: SIC-98 # ed6: PC-9801-108 # ed7: LA-98 # ed8: C-NET(98) # ed9: C-NET(98)E/L # ed10: EC/EP-98X # ed11: SIU-98-D # # MB86960A NIC # # fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98 # fe1: C-NET(98)P2/C-NET(9N)E # # FE_8BIT_SUPPORT is needed to support LAC-98 # #device ed0 at isa? port 0x00d0 net irq 6 #device ed0 at isa? port 0x10d0 net irq 6 iomem 0xc8000 # SMC EtherEZ98 #device ed5 at isa? port 0x00d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 #device ed1 at isa? port 0x00d8 net irq 6 flags 0x200000 device ed3 at isa? port 0x10d0 net irq 12 flags 0x400000 #device ed3 at isa? port 0x00d0 net irq 6 flags 0x400000 #device ed4 at isa? port 0x56d0 net irq 5 flags 0x500000 #device ed2 at isa? port 0x00d8 net irq 6 flags 0x300000 device ed7 at isa? port 0x00d4 net irq 3 flags 0x900000 #device ed7 at isa? port 0x00d0 net irq 6 flags 0x900000 #device ed6 at isa? port 0x0770 net irq 6 flags 0x800000 #device ed9 at isa? port 0x03d0 net irq 6 flags 0xb00000 #device ed8 at isa? port 0xa3d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 #device ed10 at isa? port 0x00d0 net irq 3 flags 0xd10000 #device ed11 at isa? port 0x00d0 net irq 6 iomem 0xd0000 iosiz 32768 flags 0x610000 #device ep0 at isa? port 0x40d0 net irq 3 #device fe0 at isa? port 0x00d0 net irq 3 #device fe1 at isa? port 0x73d0 net irq 5 #device lnc0 at isa? port 0x03d0 net irq 6 options "FE_8BIT_SUPPORT" # LAC-98 support # PCCARD NIC drivers. # ze and zp take over the pcic and cannot coexist with generic pccard # support, nor the ed and ep drivers they replace. #device zp0 at isa? port 0x00d0 net irq 10 iomem 0xe0000 # Sound Blaster & Wave Blaster controller snd0 device sb0 at isa? port 0x20d2 irq 5 conflicts drq 3 #device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3 device sbxvi0 at isa? conflicts drq 3 #device sbxvi0 at isa? drq 3 device sbmidi0 at isa? port 0x80d2 #device opl0 at isa? port 0x28d2 #device joy0 at isa? port 0x04d2 #device nss0 at isa? port 0xa460 irq 12 #device mss0 at isa? port 0xf40 irq 12 drq 1 #device mpu0 at isa? port 0xe0d0 irq 6 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP #pseudo-device vn 1 # Vnode driver pseudo-device tun 1 # Packet tunnel pseudo-device pty 16 # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 1 #Berkeley packet filter