|
TALL NARROW
QUADRIFILAR HELIX ANTENNA
Here you can find
some interesting photos of how me and my father built the tall-narrow
Quadrifilar Helical (QFH) antenna.
Photo
1
All the tools
and antenna elements needed for building the antenna
Photo
2
The elements
ready for soldering them together
Photo
3
Photo
4
Soldering the elements. Pay attention to the
wet piece of kitchen paper placed near the plastic pipe to prevent it from
melting due to the high temperature generated at the soldering point.
Photo
5
The plastic cover placed on the top end of
the plastic pipe with the 4 holes placed 90 degrees apart each other. This
cover is used to house the 4-turn RG-58 balun and prevents rain and sun to
come in contact with the balun.
Photo
6
RG-58
connections inside the plastic pipe
Photo
7,8,9
Finishing the
antenna (on Saturday night)
Photo
10
The antenna on
the mast
Page updated:
11/3/03(14:00UTC) created: 13/12/00
|