
---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c]  '3DNow AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0181   0.0150   0.0149   0.0206   0.0179   0.0162   0.0147   0.0203
   0.0162   0.0153   0.0141   0.0161   0.0165   0.0152   0.0166   0.0144
   0.0151   0.0162   0.0150   0.0133   0.0149   0.0130   0.0164   0.0137
   0.0191   0.0145   0.0156   0.0202   0.0191   0.0144   0.0159   0.0179
   0.0199   0.0166   0.0142   0.0211   0.0209   0.0163   0.0150   0.0218
   0.0137   0.0136   0.0161   0.0141   0.0135   0.0184   0.0185   0.0141
   0.0153   0.0154   0.0163   0.0158   0.0149   0.0160   0.0172   0.0147
   0.0219   0.0155   0.0156   0.0210   0.0231   0.0143   0.0137   0.0203
Worst pmse = 0.023100  (meets spec limit 0.06)
Overall mse = 0.016487  (meets spec limit 0.02)

Mean errors:
   0.0181  -0.0010  -0.0017   0.0206   0.0179   0.0008  -0.0003   0.0203
   0.0000   0.0001  -0.0013   0.0005   0.0009   0.0016  -0.0018   0.0000
  -0.0005   0.0010  -0.0002  -0.0001  -0.0009  -0.0002  -0.0014  -0.0009
   0.0191  -0.0025   0.0004   0.0200   0.0191   0.0012  -0.0001   0.0179
   0.0199  -0.0010   0.0004   0.0209   0.0209  -0.0009  -0.0010   0.0218
   0.0003  -0.0002   0.0003  -0.0011  -0.0007  -0.0016   0.0015  -0.0007
  -0.0001  -0.0014  -0.0003   0.0022   0.0005   0.0010  -0.0012   0.0003
   0.0219   0.0021   0.0016   0.0208   0.0229  -0.0015   0.0023   0.0203
Worst mean error = 0.022900  (FAILS spec limit 0.015)
Overall mean error = 0.004950  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c]  '3DNow AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0166   0.0154   0.0149   0.0186   0.0196   0.0133   0.0157   0.0191
   0.0160   0.0158   0.0134   0.0140   0.0143   0.0155   0.0169   0.0143
   0.0137   0.0158   0.0161   0.0159   0.0136   0.0154   0.0157   0.0152
   0.0184   0.0146   0.0154   0.0208   0.0185   0.0142   0.0144   0.0208
   0.0192   0.0148   0.0125   0.0185   0.0191   0.0132   0.0156   0.0181
   0.0158   0.0155   0.0124   0.0166   0.0139   0.0144   0.0146   0.0158
   0.0165   0.0142   0.0156   0.0135   0.0145   0.0149   0.0156   0.0148
   0.0205   0.0157   0.0159   0.0188   0.0196   0.0166   0.0156   0.0203
Worst pmse = 0.020800  (meets spec limit 0.06)
Overall mse = 0.016008  (meets spec limit 0.02)

Mean errors:
   0.0166  -0.0002  -0.0015   0.0180   0.0186  -0.0007   0.0005   0.0189
  -0.0012   0.0012  -0.0006   0.0010   0.0005   0.0003   0.0013  -0.0005
  -0.0009  -0.0018   0.0001   0.0021   0.0000  -0.0004  -0.0011   0.0028
   0.0180   0.0016  -0.0008   0.0204   0.0185  -0.0014   0.0004   0.0202
   0.0188   0.0004  -0.0003   0.0185   0.0191   0.0008   0.0002   0.0179
  -0.0010  -0.0003  -0.0014  -0.0006   0.0007   0.0008  -0.0008   0.0004
  -0.0009   0.0008  -0.0022  -0.0003  -0.0009  -0.0001   0.0002   0.0008
   0.0205  -0.0009   0.0003   0.0184   0.0194  -0.0002   0.0002   0.0201
Worst mean error = 0.020500  (FAILS spec limit 0.015)
Overall mean error = 0.004661  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c]  '3DNow AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0164   0.0116   0.0138   0.0176   0.0162   0.0126   0.0126   0.0165
   0.0133   0.0133   0.0128   0.0107   0.0133   0.0139   0.0131   0.0156
   0.0114   0.0123   0.0126   0.0118   0.0141   0.0134   0.0133   0.0129
   0.0159   0.0122   0.0148   0.0152   0.0188   0.0123   0.0125   0.0190
   0.0172   0.0134   0.0134   0.0169   0.0172   0.0149   0.0133   0.0159
   0.0121   0.0130   0.0128   0.0133   0.0136   0.0147   0.0135   0.0152
   0.0134   0.0147   0.0130   0.0123   0.0144   0.0140   0.0134   0.0124
   0.0172   0.0152   0.0138   0.0190   0.0178   0.0135   0.0143   0.0168
Worst pmse = 0.019000  (meets spec limit 0.06)
Overall mse = 0.014241  (meets spec limit 0.02)

Mean errors:
   0.0164   0.0008   0.0018   0.0172   0.0162  -0.0002   0.0008   0.0165
  -0.0021   0.0003   0.0014  -0.0003  -0.0017   0.0001   0.0027  -0.0024
  -0.0002  -0.0013   0.0000   0.0010  -0.0001   0.0000   0.0001  -0.0019
   0.0157   0.0008   0.0000   0.0150   0.0188  -0.0007  -0.0013   0.0190
   0.0172  -0.0012   0.0026   0.0169   0.0172   0.0015   0.0017   0.0159
   0.0015   0.0012   0.0012   0.0003   0.0002   0.0019   0.0001  -0.0024
  -0.0016   0.0015  -0.0032   0.0003  -0.0010   0.0006  -0.0006  -0.0004
   0.0172  -0.0002  -0.0012   0.0190   0.0176  -0.0015  -0.0007   0.0168
Worst mean error = 0.019000  (FAILS spec limit 0.015)
Overall mean error = 0.004231  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c]  '3DNow AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0195   0.0134   0.0146   0.0205   0.0200   0.0154   0.0152   0.0205
   0.0163   0.0176   0.0149   0.0169   0.0157   0.0160   0.0172   0.0151
   0.0143   0.0154   0.0162   0.0120   0.0134   0.0148   0.0155   0.0151
   0.0200   0.0166   0.0161   0.0217   0.0194   0.0162   0.0152   0.0190
   0.0218   0.0176   0.0147   0.0207   0.0209   0.0158   0.0157   0.0189
   0.0149   0.0147   0.0161   0.0153   0.0163   0.0167   0.0164   0.0134
   0.0151   0.0165   0.0173   0.0170   0.0141   0.0134   0.0163   0.0136
   0.0179   0.0150   0.0169   0.0206   0.0186   0.0144   0.0163   0.0199
Worst pmse = 0.021800  (meets spec limit 0.06)
Overall mse = 0.016602  (meets spec limit 0.02)

Mean errors:
   0.0195   0.0010   0.0004   0.0203   0.0198  -0.0016  -0.0002   0.0205
  -0.0003   0.0004   0.0009  -0.0021   0.0011   0.0036   0.0012  -0.0013
  -0.0001   0.0010   0.0020   0.0010   0.0002   0.0028  -0.0009  -0.0009
   0.0200  -0.0008   0.0015   0.0217   0.0194   0.0004   0.0014   0.0190
   0.0216  -0.0008   0.0001   0.0207   0.0209  -0.0010  -0.0011   0.0189
  -0.0007  -0.0009  -0.0013  -0.0015  -0.0009   0.0001  -0.0008  -0.0008
   0.0003   0.0021   0.0011   0.0002  -0.0001   0.0012   0.0011   0.0014
   0.0179  -0.0006  -0.0005   0.0204   0.0186   0.0022  -0.0007   0.0199
Worst mean error = 0.021700  (FAILS spec limit 0.015)
Overall mean error = 0.005123  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c]  '3DNow AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0179   0.0159   0.0141   0.0199   0.0221   0.0134   0.0144   0.0208
   0.0145   0.0164   0.0155   0.0159   0.0138   0.0160   0.0163   0.0147
   0.0172   0.0160   0.0157   0.0144   0.0155   0.0158   0.0158   0.0143
   0.0214   0.0154   0.0133   0.0213   0.0206   0.0131   0.0130   0.0204
   0.0203   0.0138   0.0164   0.0195   0.0191   0.0155   0.0165   0.0223
   0.0177   0.0137   0.0150   0.0158   0.0147   0.0142   0.0169   0.0137
   0.0151   0.0144   0.0148   0.0125   0.0143   0.0167   0.0145   0.0146
   0.0207   0.0165   0.0149   0.0202   0.0199   0.0145   0.0155   0.0204
Worst pmse = 0.022300  (meets spec limit 0.06)
Overall mse = 0.016397  (meets spec limit 0.02)

Mean errors:
   0.0179   0.0005  -0.0001   0.0199   0.0219   0.0008   0.0008   0.0208
  -0.0005   0.0002   0.0009   0.0003   0.0002  -0.0004  -0.0001   0.0013
   0.0016   0.0004  -0.0001   0.0002   0.0005  -0.0008  -0.0022  -0.0013
   0.0212  -0.0006   0.0013   0.0211   0.0206   0.0015   0.0010   0.0200
   0.0197  -0.0008   0.0018   0.0191   0.0191   0.0019  -0.0013   0.0221
   0.0017   0.0007  -0.0014   0.0014   0.0015   0.0000   0.0013   0.0005
  -0.0013  -0.0012   0.0010  -0.0001   0.0013  -0.0009  -0.0021   0.0000
   0.0207  -0.0013  -0.0015   0.0196   0.0197  -0.0011  -0.0013   0.0204
Worst mean error = 0.022100  (FAILS spec limit 0.015)
Overall mean error = 0.005125  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c]  '3DNow AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0161   0.0114   0.0127   0.0162   0.0175   0.0129   0.0124   0.0170
   0.0130   0.0145   0.0122   0.0123   0.0121   0.0141   0.0146   0.0124
   0.0115   0.0117   0.0143   0.0097   0.0125   0.0129   0.0132   0.0131
   0.0185   0.0132   0.0145   0.0138   0.0168   0.0113   0.0121   0.0155
   0.0141   0.0141   0.0111   0.0161   0.0169   0.0132   0.0132   0.0175
   0.0119   0.0119   0.0130   0.0112   0.0119   0.0146   0.0129   0.0134
   0.0139   0.0116   0.0126   0.0147   0.0151   0.0124   0.0130   0.0127
   0.0159   0.0127   0.0133   0.0166   0.0185   0.0122   0.0141   0.0154
Worst pmse = 0.018500  (meets spec limit 0.06)
Overall mse = 0.013714  (meets spec limit 0.02)

Mean errors:
   0.0161  -0.0006   0.0001   0.0162   0.0175   0.0011  -0.0006   0.0170
   0.0016   0.0005  -0.0010   0.0011  -0.0001  -0.0003   0.0010   0.0018
   0.0003   0.0021  -0.0003  -0.0013  -0.0001  -0.0003   0.0004  -0.0003
   0.0185  -0.0008  -0.0007   0.0138   0.0168  -0.0011  -0.0013   0.0155
   0.0141   0.0013   0.0007   0.0161   0.0167  -0.0018  -0.0012   0.0175
  -0.0003   0.0009   0.0000  -0.0014   0.0009   0.0008   0.0001   0.0012
   0.0013   0.0004   0.0000  -0.0009   0.0019   0.0000   0.0000   0.0017
   0.0157  -0.0015  -0.0025   0.0166   0.0185   0.0014   0.0013   0.0154
Worst mean error = 0.018500  (FAILS spec limit 0.015)
Overall mean error = 0.004180  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero


Profile: Function timing, sorted by time
Date:    Sat Jul 22 21:30:39 2000


Program Statistics
------------------
    Command line at 2000 Jul 22 21:30: "C:\work\proj\fdct1180\Debug\ieee1180" -256 255 1 10000
    Total time: 9067.523 millisecond
    Time outside of functions: 5.703 millisecond
    Call depth: 2
    Total functions: 26
    Total hits: 680010
    Function coverage: 38.5%
    Overhead Calculated 6
    Overhead Average 6

Module Statistics for ieee1180.exe
----------------------------------
    Time in module: 9061.820 millisecond
    Percent of time in module: 100.0%
    Functions in module: 26
    Hits in module: 680010
    Module function coverage: 38.5%

        Func          Func+Child           Hit
        Time   %         Time      %      Count  Function
---------------------------------------------------------
    5453.424  60.2     5453.424  60.2    20000 _ref_idct (ieeetest.obj)
    2722.146  30.0     2722.146  30.0    10000 _ref_fdct (ieeetest.obj)
     511.037   5.6      511.037   5.6   640000 _ieeerand (ieeetest.obj)
     336.946   3.7     9061.820 100.0        1 _main (ieeetest.obj)
      38.031   0.4       38.031   0.4    10000 _fdct_3dnow (fdct3dn.obj)
       0.187   0.0        0.187   0.0        1 _init_fdct_3dnow (fdct3dn.obj)
       0.024   0.0        0.024   0.0        1 _ref_dct_init (ieeetest.obj)
       0.011   0.0        0.011   0.0        1 _intfdct (fdctint.obj)
       0.009   0.0        0.009   0.0        1 _init_fdctdaan (fdctref.obj)
       0.004   0.0        0.004   0.0        5 _meets (ieeetest.obj)