********************************
**** EXACT ROUNDING ENABLED ****
********************************
(Exact rounding uses the C-code loop to perform the final descaling/
 rounding on the DCT output.)
---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c] '3D-Now AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0180   0.0150   0.0149   0.0206   0.0179   0.0162   0.0148   0.0204
   0.0162   0.0153   0.0140   0.0161   0.0165   0.0152   0.0165   0.0145
   0.0151   0.0162   0.0150   0.0133   0.0148   0.0130   0.0163   0.0136
   0.0191   0.0145   0.0156   0.0202   0.0191   0.0142   0.0158   0.0178
   0.0199   0.0166   0.0142   0.0211   0.0210   0.0162   0.0150   0.0218
   0.0137   0.0134   0.0161   0.0141   0.0135   0.0183   0.0186   0.0141
   0.0152   0.0154   0.0163   0.0159   0.0149   0.0160   0.0171   0.0146
   0.0220   0.0154   0.0156   0.0209   0.0230   0.0143   0.0136   0.0203
Worst pmse = 0.023000  (meets spec limit 0.06)     [ 0.023100 ]
Overall mse = 0.016466  (meets spec limit 0.02)    [ 0.016487 ]

Mean errors:
   0.0180  -0.0010  -0.0017   0.0206   0.0179   0.0008  -0.0002   0.0204
   0.0000   0.0001  -0.0012   0.0005   0.0009   0.0014  -0.0017  -0.0001
  -0.0005   0.0010  -0.0002  -0.0001  -0.0010  -0.0002  -0.0015  -0.0010
   0.0191  -0.0025   0.0004   0.0200   0.0191   0.0012   0.0000   0.0178
   0.0199  -0.0010   0.0004   0.0209   0.0208  -0.0010  -0.0010   0.0218
   0.0003  -0.0004   0.0003  -0.0011  -0.0007  -0.0017   0.0016  -0.0007
   0.0000  -0.0014  -0.0003   0.0021   0.0005   0.0010  -0.0011   0.0002
   0.0220   0.0022   0.0016   0.0209   0.0228  -0.0015   0.0022   0.0203
Worst mean error = 0.022800  (FAILS spec limit 0.015)     [ 0.022900 ]
Overall mean error = 0.004941  (FAILS spec limit 0.0015)  [ 0.004950 ]

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c] '3D-Now AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0166   0.0156   0.0149   0.0186   0.0198   0.0134   0.0157   0.0190
   0.0160   0.0158   0.0134   0.0142   0.0142   0.0154   0.0168   0.0143
   0.0138   0.0158   0.0161   0.0159   0.0137   0.0154   0.0160   0.0152
   0.0184   0.0148   0.0153   0.0209   0.0184   0.0141   0.0144   0.0207
   0.0193   0.0148   0.0125   0.0185   0.0191   0.0131   0.0156   0.0183
   0.0158   0.0155   0.0122   0.0167   0.0139   0.0143   0.0145   0.0159
   0.0164   0.0143   0.0152   0.0135   0.0144   0.0150   0.0157   0.0149
   0.0204   0.0160   0.0158   0.0190   0.0196   0.0165   0.0154   0.0200
Worst pmse = 0.020900  (meets spec limit 0.06)    [ 0.020800 ]
Overall mse = 0.016011  (meets spec limit 0.02)   [ 0.016008 ]

Mean errors:
   0.0166  -0.0002  -0.0015   0.0180   0.0188  -0.0006   0.0005   0.0188
  -0.0012   0.0012  -0.0006   0.0010   0.0004   0.0004   0.0012  -0.0003
  -0.0010  -0.0018   0.0001   0.0021  -0.0001  -0.0002  -0.0010   0.0028
   0.0182   0.0012  -0.0005   0.0203   0.0184  -0.0013   0.0004   0.0203
   0.0191   0.0004  -0.0003   0.0185   0.0191   0.0009   0.0002   0.0181
  -0.0010  -0.0003  -0.0016  -0.0005   0.0007   0.0009  -0.0007   0.0003
  -0.0008   0.0007  -0.0022  -0.0003  -0.0008   0.0000   0.0001   0.0009
   0.0202  -0.0008   0.0002   0.0186   0.0194  -0.0001   0.0002   0.0198
Worst mean error = 0.020300  (FAILS spec limit 0.015)    [ 0.020500 ]
Overall mean error = 0.004677  (FAILS spec limit 0.0015) [ 0.004661 ]

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c] '3D-Now AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0164   0.0116   0.0137   0.0175   0.0162   0.0125   0.0124   0.0165
   0.0132   0.0133   0.0126   0.0107   0.0133   0.0137   0.0131   0.0155
   0.0114   0.0123   0.0126   0.0119   0.0139   0.0134   0.0134   0.0129
   0.0159   0.0122   0.0148   0.0152   0.0187   0.0124   0.0124   0.0189
   0.0172   0.0133   0.0133   0.0169   0.0173   0.0148   0.0132   0.0159
   0.0120   0.0129   0.0125   0.0133   0.0135   0.0147   0.0134   0.0152
   0.0134   0.0146   0.0128   0.0123   0.0143   0.0138   0.0134   0.0123
   0.0172   0.0150   0.0138   0.0191   0.0177   0.0135   0.0143   0.0168
Worst pmse = 0.019100  (meets spec limit 0.06)    [ 0.019000 ]
Overall mse = 0.014191  (meets spec limit 0.02)   [ 0.014241 ]

Mean errors:
   0.0164   0.0008   0.0019   0.0173   0.0162  -0.0003   0.0006   0.0165
  -0.0022   0.0003   0.0016  -0.0003  -0.0017   0.0001   0.0027  -0.0023
  -0.0002  -0.0013   0.0000   0.0011  -0.0003   0.0000   0.0002  -0.0019
   0.0157   0.0008   0.0000   0.0150   0.0187  -0.0008  -0.0012   0.0189
   0.0172  -0.0011   0.0027   0.0169   0.0173   0.0016   0.0016   0.0159
   0.0014   0.0011   0.0011   0.0005   0.0003   0.0019   0.0000  -0.0024
  -0.0016   0.0014  -0.0032   0.0003  -0.0009   0.0004  -0.0006  -0.0005
   0.0172  -0.0002  -0.0012   0.0191   0.0177  -0.0015  -0.0007   0.0168
Worst mean error = 0.019100  (FAILS spec limit 0.015)    [ 0.019000 ]
Overall mean error = 0.004231  (FAILS spec limit 0.0015) [ 0.004231 ]

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c] '3D-Now AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0195   0.0134   0.0146   0.0204   0.0199   0.0154   0.0152   0.0204
   0.0163   0.0178   0.0149   0.0170   0.0157   0.0159   0.0172   0.0151
   0.0143   0.0153   0.0162   0.0120   0.0134   0.0147   0.0154   0.0149
   0.0200   0.0166   0.0161   0.0217   0.0194   0.0162   0.0152   0.0189
   0.0218   0.0176   0.0147   0.0207   0.0209   0.0158   0.0157   0.0190
   0.0149   0.0147   0.0161   0.0154   0.0163   0.0167   0.0165   0.0134
   0.0151   0.0165   0.0173   0.0170   0.0141   0.0134   0.0163   0.0136
   0.0179   0.0150   0.0169   0.0206   0.0186   0.0143   0.0162   0.0199
Worst pmse = 0.021800  (meets spec limit 0.06)   [ 0.021800 ]
Overall mse = 0.016592  (meets spec limit 0.02)  [ 0.016602 ]

Mean errors:
   0.0195   0.0010   0.0004   0.0204   0.0199  -0.0016  -0.0002   0.0204
  -0.0003   0.0004   0.0009  -0.0020   0.0011   0.0035   0.0012  -0.0013
  -0.0001   0.0009   0.0020   0.0010   0.0002   0.0029  -0.0008  -0.0011
   0.0200  -0.0008   0.0015   0.0217   0.0194   0.0004   0.0014   0.0189
   0.0216  -0.0008   0.0001   0.0207   0.0209  -0.0010  -0.0011   0.0190
  -0.0007  -0.0009  -0.0013  -0.0014  -0.0009   0.0001  -0.0007  -0.0008
   0.0003   0.0021   0.0011   0.0002  -0.0001   0.0012   0.0011   0.0014
   0.0179  -0.0006  -0.0005   0.0204   0.0186   0.0021  -0.0006   0.0199
Worst mean error = 0.021700  (FAILS spec limit 0.015)     [ 0.021700 ]
Overall mean error = 0.005127  (FAILS spec limit 0.0015)  [ 0.005123 ]

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c] '3D-Now AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0177   0.0159   0.0139   0.0199   0.0222   0.0135   0.0143   0.0205
   0.0145   0.0165   0.0153   0.0159   0.0136   0.0157   0.0162   0.0146
   0.0172   0.0160   0.0158   0.0143   0.0154   0.0159   0.0160   0.0143
   0.0217   0.0151   0.0136   0.0211   0.0206   0.0133   0.0130   0.0206
   0.0207   0.0138   0.0164   0.0194   0.0188   0.0154   0.0163   0.0226
   0.0174   0.0136   0.0148   0.0160   0.0147   0.0141   0.0167   0.0137
   0.0151   0.0146   0.0150   0.0123   0.0141   0.0167   0.0143   0.0147
   0.0207   0.0165   0.0148   0.0202   0.0199   0.0145   0.0154   0.0204
Worst pmse = 0.022600  (meets spec limit 0.06)   [ 0.022300 ]
Overall mse = 0.016370  (meets spec limit 0.02)  [ 0.016397 ]

Mean errors:
   0.0177   0.0005  -0.0003   0.0199   0.0220   0.0007   0.0007   0.0205
  -0.0005   0.0001   0.0015   0.0005   0.0004  -0.0003  -0.0004   0.0014
   0.0018   0.0004  -0.0002   0.0003   0.0006  -0.0009  -0.0022  -0.0015
   0.0215  -0.0007   0.0012   0.0207   0.0206   0.0017   0.0010   0.0206
   0.0203  -0.0008   0.0018   0.0188   0.0186   0.0018  -0.0013   0.0224
   0.0020   0.0008  -0.0014   0.0016   0.0015  -0.0001   0.0015   0.0003
  -0.0013  -0.0014   0.0010  -0.0001   0.0011  -0.0009  -0.0019  -0.0001
   0.0205  -0.0013  -0.0018   0.0198   0.0199  -0.0011  -0.0012   0.0204
Worst mean error = 0.022400  (FAILS spec limit 0.015)    [ 0.022100 ]
Overall mean error = 0.005136  (FAILS spec limit 0.0015) [ 0.005125 ]

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test, for [fdct3dn.c] '3D-Now AAN FDCT'
---------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0161   0.0114   0.0127   0.0161   0.0175   0.0128   0.0124   0.0170
   0.0130   0.0145   0.0122   0.0123   0.0121   0.0141   0.0146   0.0125
   0.0115   0.0116   0.0143   0.0098   0.0125   0.0129   0.0132   0.0131
   0.0187   0.0131   0.0145   0.0138   0.0168   0.0114   0.0121   0.0155
   0.0141   0.0141   0.0110   0.0161   0.0169   0.0132   0.0132   0.0175
   0.0119   0.0119   0.0130   0.0112   0.0119   0.0146   0.0129   0.0133
   0.0139   0.0116   0.0126   0.0146   0.0151   0.0124   0.0131   0.0127
   0.0159   0.0127   0.0133   0.0165   0.0185   0.0122   0.0141   0.0154
Worst pmse = 0.018700  (meets spec limit 0.06)   [ 0.018500 ]
Overall mse = 0.013711  (meets spec limit 0.02)  [ 0.013714 ]

Mean errors:
   0.0161  -0.0006   0.0001   0.0161   0.0175   0.0010  -0.0006   0.0170
   0.0016   0.0005  -0.0010   0.0011  -0.0001  -0.0003   0.0010   0.0019
   0.0003   0.0020  -0.0003  -0.0012  -0.0001  -0.0003   0.0004  -0.0003
   0.0185  -0.0007  -0.0007   0.0138   0.0168  -0.0010  -0.0013   0.0155
   0.0141   0.0013   0.0008   0.0161   0.0167  -0.0018  -0.0012   0.0175
  -0.0003   0.0009   0.0000  -0.0014   0.0009   0.0008   0.0001   0.0011
   0.0013   0.0004   0.0000  -0.0008   0.0019   0.0000   0.0001   0.0017
   0.0157  -0.0015  -0.0025   0.0165   0.0185   0.0014   0.0013   0.0154
Worst mean error = 0.018500  (FAILS spec limit 0.015)    [ 0.018500 ]
Overall mean error = 0.004183  (FAILS spec limit 0.0015) [ 0.004180 ]

0 elements of IDCT(0) were not zero


