
-------------------------------------------------
IEEE-1180 test, for [fdctint.c]  'int32 AAN FDCT'
-------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = 1, #iters = 10000
Peak absolute values of errors:
   2   1   2   1   2   1   1   1
   1   1   1   1   1   1   2   1
   1   1   1   1   1   1   1   1
   1   1   1   2   1   1   1   1
   2   1   2   2   1   1   1   1
   1   1   1   1   1   1   2   1
   1   1   1   1   1   1   1   1
   2   2   1   1   1   2   1   2
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.4455   0.1355   0.1333   0.1196   0.1183   0.1107   0.1149   0.1139
   0.1365   0.1156   0.1083   0.1094   0.1092   0.1106   0.1116   0.1122
   0.1263   0.1186   0.1142   0.1105   0.1107   0.1142   0.1118   0.1099
   0.1090   0.1126   0.1112   0.1155   0.1153   0.1140   0.1177   0.1133
   0.1217   0.1201   0.1116   0.1147   0.1141   0.1134   0.1190   0.1147
   0.1122   0.1105   0.1112   0.1120   0.1097   0.1127   0.1124   0.1077
   0.1119   0.1094   0.1190   0.1100   0.1044   0.1112   0.1159   0.1088
   0.1152   0.1135   0.1114   0.1129   0.1155   0.1172   0.1088   0.1137
Worst pmse = 0.445500  (FAILS spec limit 0.06)
Overall mse = 0.119475  (FAILS spec limit 0.02)

Mean errors:
   0.4377  -0.0875   0.0717  -0.0244   0.0235  -0.0051   0.0163   0.0009
  -0.0801   0.0170  -0.0087   0.0056  -0.0050   0.0030  -0.0092  -0.0072
   0.0587  -0.0166   0.0082  -0.0017   0.0043   0.0050   0.0020   0.0019
  -0.0112   0.0044   0.0066  -0.0055  -0.0025   0.0020  -0.0063  -0.0059
   0.0475  -0.0139   0.0072  -0.0049  -0.0033   0.0000   0.0074  -0.0009
   0.0022   0.0041  -0.0012  -0.0032   0.0061  -0.0011  -0.0022  -0.0033
   0.0129  -0.0040   0.0042  -0.0018   0.0022   0.0006  -0.0079  -0.0012
   0.0292   0.0013   0.0056  -0.0017  -0.0013   0.0008   0.0034  -0.0013
Worst mean error = 0.437700  (FAILS spec limit 0.015)
Overall mean error = 0.007397  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



-------------------------------------------------
IEEE-1180 test, for [fdctint.c]  'int32 AAN FDCT'
-------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = 1, #iters = 10000
Peak absolute values of errors:
   2   2   1   1   1   1   1   1
   2   1   1   1   1   2   1   1
   2   1   1   2   2   2   1   2
   2   1   1   2   1   2   1   1
   2   1   1   1   1   1   1   1
   1   2   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   2   1   1   2   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.4479   0.1412   0.1272   0.1199   0.1224   0.1088   0.1153   0.1134
   0.1282   0.1165   0.1130   0.1177   0.1164   0.1148   0.1112   0.1105
   0.1216   0.1154   0.1100   0.1157   0.1072   0.1099   0.1059   0.1105
   0.1152   0.1095   0.1124   0.1202   0.1146   0.1119   0.1069   0.1161
   0.1276   0.1110   0.1157   0.1165   0.1185   0.1073   0.1140   0.1122
   0.1174   0.1192   0.1132   0.1088   0.1111   0.1100   0.1130   0.1092
   0.1138   0.1094   0.1130   0.1076   0.1110   0.1089   0.1167   0.1136
   0.1183   0.1112   0.1086   0.1168   0.1183   0.1119   0.1128   0.1134
Worst pmse = 0.447900  (FAILS spec limit 0.06)
Overall mse = 0.119647  (FAILS spec limit 0.02)

Mean errors:
   0.4405  -0.0868   0.0658  -0.0269   0.0270  -0.0078   0.0289   0.0040
  -0.0726   0.0189  -0.0142   0.0029  -0.0106   0.0028   0.0024   0.0035
   0.0546  -0.0150   0.0084   0.0025   0.0068   0.0005   0.0029   0.0025
  -0.0142   0.0047  -0.0002  -0.0114  -0.0120   0.0009  -0.0039  -0.0077
   0.0566  -0.0138   0.0131  -0.0043   0.0051  -0.0035   0.0038  -0.0086
  -0.0050  -0.0082  -0.0022  -0.0008  -0.0045   0.0042   0.0006  -0.0032
   0.0206  -0.0048   0.0040  -0.0046   0.0028   0.0009  -0.0009  -0.0002
   0.0253  -0.0096   0.0024  -0.0096  -0.0011  -0.0051   0.0026   0.0028
Worst mean error = 0.440500  (FAILS spec limit 0.015)
Overall mean error = 0.007063  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



-------------------------------------------------
IEEE-1180 test, for [fdctint.c]  'int32 AAN FDCT'
-------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = 1, #iters = 10000
Peak absolute values of errors:
   2   1   1   2   2   2   1   1
   1   1   1   2   1   1   1   1
   1   1   1   1   1   2   2   1
   1   1   1   1   1   1   1   1
   1   2   2   2   1   2   1   2
   1   1   1   1   2   1   1   2
   1   1   1   1   1   1   1   1
   1   1   1   1   2   2   2   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.3783   0.1190   0.1152   0.0981   0.1054   0.0995   0.1032   0.0948
   0.1110   0.0992   0.0984   0.0973   0.0991   0.0976   0.0975   0.0968
   0.1016   0.0938   0.1028   0.0907   0.0989   0.0927   0.0980   0.0968
   0.0984   0.0970   0.0959   0.0915   0.0988   0.0944   0.0950   0.0964
   0.1049   0.0984   0.0931   0.0943   0.0942   0.0998   0.0976   0.0997
   0.0915   0.0983   0.0982   0.0962   0.0903   0.0942   0.0948   0.0952
   0.0956   0.0944   0.0934   0.0937   0.1020   0.0956   0.0965   0.0952
   0.0935   0.1001   0.0992   0.0992   0.0924   0.1000   0.1024   0.0926
Worst pmse = 0.378300  (FAILS spec limit 0.06)
Overall mse = 0.102181  (FAILS spec limit 0.02)

Mean errors:
   0.3733  -0.0734   0.0588  -0.0175   0.0276   0.0001   0.0198   0.0040
  -0.0680   0.0198  -0.0056   0.0035  -0.0067   0.0006   0.0003  -0.0060
   0.0474  -0.0128   0.0148  -0.0039   0.0125  -0.0007  -0.0034   0.0054
  -0.0050   0.0030  -0.0025  -0.0013  -0.0048  -0.0026  -0.0034  -0.0008
   0.0425  -0.0088   0.0109  -0.0091  -0.0030  -0.0036  -0.0010  -0.0049
   0.0013   0.0041  -0.0038  -0.0066   0.0015   0.0002   0.0000  -0.0056
   0.0120  -0.0030   0.0030   0.0011  -0.0016   0.0010   0.0015  -0.0064
   0.0207  -0.0099   0.0054  -0.0032  -0.0024   0.0020   0.0060  -0.0082
Worst mean error = 0.373300  (FAILS spec limit 0.015)
Overall mean error = 0.006322  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



-------------------------------------------------
IEEE-1180 test, for [fdctint.c]  'int32 AAN FDCT'
-------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = -1, #iters = 10000
Peak absolute values of errors:
   2   2   2   1   1   1   2   2
   2   2   1   1   1   1   1   1
   2   1   1   1   2   2   1   1
   2   2   1   1   1   1   1   1
   2   1   2   2   1   1   1   1
   1   1   1   1   2   1   2   2
   1   1   1   1   1   1   1   2
   1   1   1   1   2   1   2   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.4467   0.1395   0.1234   0.1233   0.1148   0.1138   0.1177   0.1169
   0.1324   0.1139   0.1066   0.1079   0.1102   0.1061   0.1090   0.1132
   0.1269   0.1153   0.1157   0.1089   0.1133   0.1101   0.1124   0.1144
   0.1108   0.1106   0.1158   0.1127   0.1186   0.1108   0.1090   0.1142
   0.1226   0.1199   0.1111   0.1119   0.1089   0.1131   0.1154   0.1146
   0.1101   0.1135   0.1105   0.1126   0.1141   0.1107   0.1165   0.1093
   0.1129   0.1054   0.1146   0.1110   0.1088   0.1122   0.1100   0.1099
   0.1150   0.1146   0.1104   0.1138   0.1160   0.1152   0.1135   0.1145
Worst pmse = 0.446700  (FAILS spec limit 0.06)
Overall mse = 0.119180  (FAILS spec limit 0.02)

Mean errors:
   0.4407  -0.0835   0.0606  -0.0269   0.0338  -0.0030   0.0175   0.0055
  -0.0730   0.0219  -0.0122   0.0051  -0.0140  -0.0027  -0.0010  -0.0046
   0.0607  -0.0129   0.0133  -0.0015   0.0101  -0.0057   0.0066   0.0038
  -0.0048  -0.0010   0.0028  -0.0009  -0.0074  -0.0050  -0.0038  -0.0086
   0.0464  -0.0109   0.0111  -0.0047   0.0079   0.0011   0.0080  -0.0104
  -0.0077  -0.0053  -0.0027  -0.0016  -0.0003   0.0007  -0.0037  -0.0053
   0.0267  -0.0006   0.0054  -0.0078   0.0024  -0.0002   0.0062   0.0035
   0.0236  -0.0094   0.0118  -0.0054  -0.0048   0.0012  -0.0063  -0.0057
Worst mean error = 0.440700  (FAILS spec limit 0.015)
Overall mean error = 0.007392  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



-------------------------------------------------
IEEE-1180 test, for [fdctint.c]  'int32 AAN FDCT'
-------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = -1, #iters = 10000
Peak absolute values of errors:
   2   1   2   2   1   1   1   1
   2   1   1   1   1   1   1   1
   2   1   1   1   1   2   1   1
   1   1   1   1   2   1   1   1
   1   2   1   1   1   1   2   1
   1   1   1   1   2   1   1   1
   1   1   1   2   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.4467   0.1391   0.1315   0.1193   0.1192   0.1062   0.1082   0.1131
   0.1383   0.1137   0.1133   0.1106   0.1104   0.1127   0.1089   0.1124
   0.1227   0.1144   0.1075   0.1108   0.1124   0.1085   0.1103   0.1144
   0.1106   0.1089   0.1123   0.1174   0.1119   0.1071   0.1132   0.1161
   0.1193   0.1124   0.1107   0.1172   0.1118   0.1110   0.1114   0.1181
   0.1184   0.1163   0.1113   0.1139   0.1107   0.1111   0.1105   0.1091
   0.1205   0.1154   0.1111   0.1112   0.1071   0.1100   0.1130   0.1197
   0.1158   0.1147   0.1098   0.1168   0.1116   0.1159   0.1159   0.1126
Worst pmse = 0.446700  (FAILS spec limit 0.06)
Overall mse = 0.119319  (FAILS spec limit 0.02)

Mean errors:
   0.4413  -0.0849   0.0639  -0.0307   0.0308  -0.0012   0.0206   0.0047
  -0.0763   0.0209  -0.0145   0.0040  -0.0098  -0.0001  -0.0075  -0.0024
   0.0605  -0.0142   0.0121  -0.0056   0.0074  -0.0017   0.0029  -0.0038
  -0.0052   0.0019  -0.0049  -0.0006  -0.0027  -0.0005  -0.0022  -0.0047
   0.0459  -0.0168   0.0093  -0.0088   0.0042   0.0024   0.0058  -0.0019
  -0.0034   0.0013  -0.0005   0.0027  -0.0007  -0.0079  -0.0021  -0.0057
   0.0241  -0.0056   0.0065  -0.0036   0.0005   0.0034   0.0026  -0.0023
   0.0226  -0.0031   0.0080  -0.0024  -0.0006  -0.0013   0.0105  -0.0034
Worst mean error = 0.441300  (FAILS spec limit 0.015)
Overall mean error = 0.007456  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



-------------------------------------------------
IEEE-1180 test, for [fdctint.c]  'int32 AAN FDCT'
-------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = -1, #iters = 10000
Peak absolute values of errors:
   2   2   2   1   1   1   1   1
   2   1   1   2   1   1   1   1
   1   1   1   1   2   1   1   1
   2   1   1   1   1   1   2   2
   2   1   1   1   1   1   2   2
   2   1   1   1   1   1   1   1
   1   1   1   2   1   1   1   1
   1   2   1   1   2   1   1   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.3859   0.1187   0.1093   0.0995   0.1057   0.0966   0.0964   0.0991
   0.1192   0.0923   0.0955   0.0977   0.0939   0.0953   0.0967   0.0943
   0.1046   0.0966   0.1043   0.0914   0.0958   0.0931   0.0968   0.0961
   0.0944   0.0969   0.0980   0.0940   0.0998   0.0940   0.0982   0.1009
   0.1009   0.1010   0.0910   0.0957   0.0973   0.0987   0.0961   0.0986
   0.0913   0.0944   0.0947   0.0967   0.0885   0.0960   0.0942   0.0968
   0.1001   0.0905   0.0976   0.0958   0.0932   0.0950   0.0968   0.0936
   0.0975   0.0958   0.0954   0.0938   0.0928   0.0980   0.1008   0.0958
Worst pmse = 0.385900  (FAILS spec limit 0.06)
Overall mse = 0.101803  (FAILS spec limit 0.02)

Mean errors:
   0.3795  -0.0689   0.0547  -0.0261   0.0339  -0.0056   0.0208   0.0057
  -0.0674   0.0125  -0.0117   0.0053  -0.0091  -0.0031  -0.0107   0.0049
   0.0478  -0.0126   0.0151   0.0000   0.0004   0.0023   0.0082   0.0013
  -0.0038   0.0011   0.0006  -0.0066  -0.0024  -0.0020  -0.0028  -0.0055
   0.0423  -0.0088   0.0072  -0.0031  -0.0003  -0.0063   0.0057  -0.0060
  -0.0027  -0.0006  -0.0065  -0.0001  -0.0043   0.0036   0.0000   0.0066
   0.0153   0.0009   0.0008   0.0000   0.0042   0.0014   0.0030   0.0026
   0.0171  -0.0012   0.0042  -0.0080   0.0028  -0.0058   0.0008  -0.0030
Worst mean error = 0.379500  (FAILS spec limit 0.015)
Overall mean error = 0.006525  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



Profile: Function timing, sorted by time
Date:    Sat Jul 15 16:31:34 2000


Program Statistics
------------------
    Command line at 2000 Jul 15 16:31: "C:\temp\amd\ieee1180\Debug\ieee1180"  -256 255 1 10000
    Total time: 8052.108 millisecond
    Time outside of functions: 4.326 millisecond
    Call depth: 2
    Total functions: 23
    Total hits: 680010
    Function coverage: 39.1%
    Overhead Calculated 7
    Overhead Average 7

Module Statistics for ieee1180.exe
----------------------------------
    Time in module: 8047.782 millisecond
    Percent of time in module: 100.0%
    Functions in module: 23
    Hits in module: 680010
    Module function coverage: 39.1%

        Func          Func+Child           Hit
        Time   %         Time      %      Count  Function
---------------------------------------------------------
    5329.990  66.2     5329.990  66.2    20000 _ref_idct (ieeetest.obj)
    2649.512  32.9     2649.512  32.9    10000 _ref_fdct (ieeetest.obj)
      68.105   0.8       68.105   0.8    10001 _intfdct (fdctint.obj)
       0.139   0.0        0.139   0.0        1 _init_fdct_3dnow (fdct3dn.obj)
       0.026   0.0        0.026   0.0        1 _ref_dct_init (ieeetest.obj)
       0.008   0.0        0.008   0.0        1 _init_fdctdaan (fdctref.obj)
       0.001   0.0        0.001   0.0        5 _meets (ieeetest.obj)
       0.000   0.0        0.000   0.0   640000 _ieeerand (ieeetest.obj)
       0.000   0.0     7710.670  95.8        1 _main (ieeetest.obj)

