
--------------------------------------------
IEEE-1180 test, for [idctmm32.c] 'MMX32 IDCT'
--------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = 1, #iters = 10000
Peak absolute values of errors:
   2   1   2   1   2   1   1   1
   1   1   1   1   1   1   2   1
   1   1   1   1   1   1   1   1
   1   1   1   2   1   1   1   1
   2   1   2   2   1   1   1   1
   1   1   1   1   1   1   2   1
   1   1   1   1   1   1   1   1
   2   2   1   1   1   2   1   2
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.4455   0.1355   0.1333   0.1196   0.1183   0.1107   0.1149   0.1139
   0.1365   0.1156   0.1083   0.1094   0.1092   0.1106   0.1116   0.1122
   0.1263   0.1186   0.1142   0.1105   0.1107   0.1142   0.1118   0.1099
   0.1090   0.1126   0.1112   0.1155   0.1153   0.1140   0.1177   0.1133
   0.1217   0.1201   0.1116   0.1147   0.1141   0.1134   0.1190   0.1147
   0.1122   0.1105   0.1112   0.1120   0.1097   0.1127   0.1124   0.1077
   0.1119   0.1094   0.1190   0.1100   0.1044   0.1112   0.1159   0.1088
   0.1152   0.1135   0.1114   0.1129   0.1155   0.1172   0.1088   0.1137
Worst pmse = 0.445500  (FAILS spec limit 0.06)
Overall mse = 0.119475  (FAILS spec limit 0.02)

Mean errors:
   0.4377  -0.0875   0.0717  -0.0244   0.0235  -0.0051   0.0163   0.0009
  -0.0801   0.0170  -0.0087   0.0056  -0.0050   0.0030  -0.0092  -0.0072
   0.0587  -0.0166   0.0082  -0.0017   0.0043   0.0050   0.0020   0.0019
  -0.0112   0.0044   0.0066  -0.0055  -0.0025   0.0020  -0.0063  -0.0059
   0.0475  -0.0139   0.0072  -0.0049  -0.0033   0.0000   0.0074  -0.0009
   0.0022   0.0041  -0.0012  -0.0032   0.0061  -0.0011  -0.0022  -0.0033
   0.0129  -0.0040   0.0042  -0.0018   0.0022   0.0006  -0.0079  -0.0012
   0.0292   0.0013   0.0056  -0.0017  -0.0013   0.0008   0.0034  -0.0013
Worst mean error = 0.437700  (FAILS spec limit 0.015)
Overall mean error = 0.007397  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



--------------------------------------------
IEEE-1180 test, for [idctmm32.c] 'MMX32 IDCT'
--------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = 1, #iters = 10000
Peak absolute values of errors:
   2   2   1   1   1   1   1   1
   2   1   1   1   1   2   1   1
   2   1   1   2   2   2   1   2
   2   1   1   2   1   2   1   1
   2   1   1   1   1   1   1   1
   1   2   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   2   1   1   2   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.4479   0.1412   0.1272   0.1199   0.1224   0.1088   0.1153   0.1134
   0.1282   0.1165   0.1130   0.1177   0.1164   0.1148   0.1112   0.1105
   0.1216   0.1154   0.1100   0.1157   0.1072   0.1099   0.1059   0.1105
   0.1152   0.1095   0.1124   0.1202   0.1146   0.1119   0.1069   0.1161
   0.1276   0.1110   0.1157   0.1165   0.1185   0.1073   0.1140   0.1122
   0.1174   0.1192   0.1132   0.1088   0.1111   0.1100   0.1130   0.1092
   0.1138   0.1094   0.1130   0.1076   0.1110   0.1089   0.1167   0.1136
   0.1183   0.1112   0.1086   0.1168   0.1183   0.1119   0.1128   0.1134
Worst pmse = 0.447900  (FAILS spec limit 0.06)
Overall mse = 0.119647  (FAILS spec limit 0.02)

Mean errors:
   0.4405  -0.0868   0.0658  -0.0269   0.0270  -0.0078   0.0289   0.0040
  -0.0726   0.0189  -0.0142   0.0029  -0.0106   0.0028   0.0024   0.0035
   0.0546  -0.0150   0.0084   0.0025   0.0068   0.0005   0.0029   0.0025
  -0.0142   0.0047  -0.0002  -0.0114  -0.0120   0.0009  -0.0039  -0.0077
   0.0566  -0.0138   0.0131  -0.0043   0.0051  -0.0035   0.0038  -0.0086
  -0.0050  -0.0082  -0.0022  -0.0008  -0.0045   0.0042   0.0006  -0.0032
   0.0206  -0.0048   0.0040  -0.0046   0.0028   0.0009  -0.0009  -0.0002
   0.0253  -0.0096   0.0024  -0.0096  -0.0011  -0.0051   0.0026   0.0028
Worst mean error = 0.440500  (FAILS spec limit 0.015)
Overall mean error = 0.007063  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



--------------------------------------------
IEEE-1180 test, for [idctmm32.c] 'MMX32 IDCT'
--------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = 1, #iters = 10000
Peak absolute values of errors:
   2   1   1   2   2   2   1   1
   1   1   1   2   1   1   1   1
   1   1   1   1   1   2   2   1
   1   1   1   1   1   1   1   1
   1   2   2   2   1   2   1   2
   1   1   1   1   2   1   1   2
   1   1   1   1   1   1   1   1
   1   1   1   1   2   2   2   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.3783   0.1190   0.1152   0.0981   0.1054   0.0995   0.1032   0.0948
   0.1110   0.0992   0.0984   0.0973   0.0991   0.0976   0.0975   0.0968
   0.1016   0.0938   0.1028   0.0907   0.0989   0.0927   0.0980   0.0968
   0.0984   0.0970   0.0959   0.0915   0.0988   0.0944   0.0950   0.0964
   0.1049   0.0984   0.0931   0.0943   0.0942   0.0998   0.0976   0.0997
   0.0915   0.0983   0.0982   0.0962   0.0903   0.0942   0.0948   0.0952
   0.0956   0.0944   0.0934   0.0937   0.1020   0.0956   0.0965   0.0952
   0.0935   0.1001   0.0992   0.0992   0.0924   0.1000   0.1024   0.0926
Worst pmse = 0.378300  (FAILS spec limit 0.06)
Overall mse = 0.102181  (FAILS spec limit 0.02)

Mean errors:
   0.3733  -0.0734   0.0588  -0.0175   0.0276   0.0001   0.0198   0.0040
  -0.0680   0.0198  -0.0056   0.0035  -0.0067   0.0006   0.0003  -0.0060
   0.0474  -0.0128   0.0148  -0.0039   0.0125  -0.0007  -0.0034   0.0054
  -0.0050   0.0030  -0.0025  -0.0013  -0.0048  -0.0026  -0.0034  -0.0008
   0.0425  -0.0088   0.0109  -0.0091  -0.0030  -0.0036  -0.0010  -0.0049
   0.0013   0.0041  -0.0038  -0.0066   0.0015   0.0002   0.0000  -0.0056
   0.0120  -0.0030   0.0030   0.0011  -0.0016   0.0010   0.0015  -0.0064
   0.0207  -0.0099   0.0054  -0.0032  -0.0024   0.0020   0.0060  -0.0082
Worst mean error = 0.373300  (FAILS spec limit 0.015)
Overall mean error = 0.006322  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



--------------------------------------------
IEEE-1180 test, for [idctmm32.c] 'MMX32 IDCT'
--------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = -1, #iters = 10000
Peak absolute values of errors:
   2   2   2   1   1   1   2   2
   2   2   1   1   1   1   1   1
   2   1   1   1   2   2   1   1
   2   2   1   1   1   1   1   1
   2   1   2   2   1   1   1   1
   1   1   1   1   2   1   2   2
   1   1   1   1   1   1   1   2
   1   1   1   1   2   1   2   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.4467   0.1395   0.1234   0.1233   0.1148   0.1138   0.1177   0.1169
   0.1324   0.1139   0.1066   0.1079   0.1102   0.1061   0.1090   0.1132
   0.1269   0.1153   0.1157   0.1089   0.1133   0.1101   0.1124   0.1144
   0.1108   0.1106   0.1158   0.1127   0.1186   0.1108   0.1090   0.1142
   0.1226   0.1199   0.1111   0.1119   0.1089   0.1131   0.1154   0.1146
   0.1101   0.1135   0.1105   0.1126   0.1141   0.1107   0.1165   0.1093
   0.1129   0.1054   0.1146   0.1110   0.1088   0.1122   0.1100   0.1099
   0.1150   0.1146   0.1104   0.1138   0.1160   0.1152   0.1135   0.1145
Worst pmse = 0.446700  (FAILS spec limit 0.06)
Overall mse = 0.119180  (FAILS spec limit 0.02)

Mean errors:
   0.4407  -0.0835   0.0606  -0.0269   0.0338  -0.0030   0.0175   0.0055
  -0.0730   0.0219  -0.0122   0.0051  -0.0140  -0.0027  -0.0010  -0.0046
   0.0607  -0.0129   0.0133  -0.0015   0.0101  -0.0057   0.0066   0.0038
  -0.0048  -0.0010   0.0028  -0.0009  -0.0074  -0.0050  -0.0038  -0.0086
   0.0464  -0.0109   0.0111  -0.0047   0.0079   0.0011   0.0080  -0.0104
  -0.0077  -0.0053  -0.0027  -0.0016  -0.0003   0.0007  -0.0037  -0.0053
   0.0267  -0.0006   0.0054  -0.0078   0.0024  -0.0002   0.0062   0.0035
   0.0236  -0.0094   0.0118  -0.0054  -0.0048   0.0012  -0.0063  -0.0057
Worst mean error = 0.440700  (FAILS spec limit 0.015)
Overall mean error = 0.007392  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



--------------------------------------------
IEEE-1180 test, for [idctmm32.c] 'MMX32 IDCT'
--------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = -1, #iters = 10000
Peak absolute values of errors:
   2   1   2   2   1   1   1   1
   2   1   1   1   1   1   1   1
   2   1   1   1   1   2   1   1
   1   1   1   1   2   1   1   1
   1   2   1   1   1   1   2   1
   1   1   1   1   2   1   1   1
   1   1   1   2   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.4467   0.1391   0.1315   0.1193   0.1192   0.1062   0.1082   0.1131
   0.1383   0.1137   0.1133   0.1106   0.1104   0.1127   0.1089   0.1124
   0.1227   0.1144   0.1075   0.1108   0.1124   0.1085   0.1103   0.1144
   0.1106   0.1089   0.1123   0.1174   0.1119   0.1071   0.1132   0.1161
   0.1193   0.1124   0.1107   0.1172   0.1118   0.1110   0.1114   0.1181
   0.1184   0.1163   0.1113   0.1139   0.1107   0.1111   0.1105   0.1091
   0.1205   0.1154   0.1111   0.1112   0.1071   0.1100   0.1130   0.1197
   0.1158   0.1147   0.1098   0.1168   0.1116   0.1159   0.1159   0.1126
Worst pmse = 0.446700  (FAILS spec limit 0.06)
Overall mse = 0.119319  (FAILS spec limit 0.02)

Mean errors:
   0.4413  -0.0849   0.0639  -0.0307   0.0308  -0.0012   0.0206   0.0047
  -0.0763   0.0209  -0.0145   0.0040  -0.0098  -0.0001  -0.0075  -0.0024
   0.0605  -0.0142   0.0121  -0.0056   0.0074  -0.0017   0.0029  -0.0038
  -0.0052   0.0019  -0.0049  -0.0006  -0.0027  -0.0005  -0.0022  -0.0047
   0.0459  -0.0168   0.0093  -0.0088   0.0042   0.0024   0.0058  -0.0019
  -0.0034   0.0013  -0.0005   0.0027  -0.0007  -0.0079  -0.0021  -0.0057
   0.0241  -0.0056   0.0065  -0.0036   0.0005   0.0034   0.0026  -0.0023
   0.0226  -0.0031   0.0080  -0.0024  -0.0006  -0.0013   0.0105  -0.0034
Worst mean error = 0.441300  (FAILS spec limit 0.015)
Overall mean error = 0.007456  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



--------------------------------------------
IEEE-1180 test, for [idctmm32.c] 'MMX32 IDCT'
--------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = -1, #iters = 10000
Peak absolute values of errors:
   2   2   2   1   1   1   1   1
   2   1   1   2   1   1   1   1
   1   1   1   1   2   1   1   1
   2   1   1   1   1   1   2   2
   2   1   1   1   1   1   2   2
   2   1   1   1   1   1   1   1
   1   1   1   2   1   1   1   1
   1   2   1   1   2   1   1   1
Worst peak error = 2  (FAILS spec limit 1)

Mean square errors:
   0.3859   0.1187   0.1093   0.0995   0.1057   0.0966   0.0964   0.0991
   0.1192   0.0923   0.0955   0.0977   0.0939   0.0953   0.0967   0.0943
   0.1046   0.0966   0.1043   0.0914   0.0958   0.0931   0.0968   0.0961
   0.0944   0.0969   0.0980   0.0940   0.0998   0.0940   0.0982   0.1009
   0.1009   0.1010   0.0910   0.0957   0.0973   0.0987   0.0961   0.0986
   0.0913   0.0944   0.0947   0.0967   0.0885   0.0960   0.0942   0.0968
   0.1001   0.0905   0.0976   0.0958   0.0932   0.0950   0.0968   0.0936
   0.0975   0.0958   0.0954   0.0938   0.0928   0.0980   0.1008   0.0958
Worst pmse = 0.385900  (FAILS spec limit 0.06)
Overall mse = 0.101803  (FAILS spec limit 0.02)

Mean errors:
   0.3795  -0.0689   0.0547  -0.0261   0.0339  -0.0056   0.0208   0.0057
  -0.0674   0.0125  -0.0117   0.0053  -0.0091  -0.0031  -0.0107   0.0049
   0.0478  -0.0126   0.0151   0.0000   0.0004   0.0023   0.0082   0.0013
  -0.0038   0.0011   0.0006  -0.0066  -0.0024  -0.0020  -0.0028  -0.0055
   0.0423  -0.0088   0.0072  -0.0031  -0.0003  -0.0063   0.0057  -0.0060
  -0.0027  -0.0006  -0.0065  -0.0001  -0.0043   0.0036   0.0000   0.0066
   0.0153   0.0009   0.0008   0.0000   0.0042   0.0014   0.0030   0.0026
   0.0171  -0.0012   0.0042  -0.0080   0.0028  -0.0058   0.0008  -0.0030
Worst mean error = 0.379500  (FAILS spec limit 0.015)
Overall mean error = 0.006525  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero


