
-------------------------------------------------------
IEEE-1180 test: [idct_ap922x87.c] 'AP922float iDCT'
  typedef float ssefloat;      // 32-bit precision
  #define USE_FAST_FLOAT2INT 1
-------------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = 1, #iters = 10000
Peak absolute values of errors:
   0   1   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   1
   0   0   0   0   0   0   0   0
   0   0   0   0   0   1   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00010
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst pmse  =   0.00010000  (meets spec limit 0.06)
Overall mse =   0.00000469  (meets spec limit 0.02)

Mean errors:
  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00010
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst mean error   =   0.00010000  (meets spec limit 0.015)
Overall mean error =   0.00000469  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



-------------------------------------------------------
IEEE-1180 test: [idct_ap922x87.c] 'AP922float iDCT'
-------------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = 1, #iters = 10000
Peak absolute values of errors:
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   1   0   1   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   1   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00010  0.00000  0.00010  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst pmse  =   0.00010000  (meets spec limit 0.06)
Overall mse =   0.00000469  (meets spec limit 0.02)

Mean errors:
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00010  0.00000  0.00010  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst mean error   =   0.00010000  (meets spec limit 0.015)
Overall mean error =   0.00000469  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



-------------------------------------------------------
IEEE-1180 test: [idct_ap922x87.c] 'AP922float iDCT'
-------------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = 1, #iters = 10000
Peak absolute values of errors:
   0   0   0   0   0   0   0   0
   1   0   0   0   0   0   0   0
   1   0   0   0   0   0   0   0
   0   0   0   0   1   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   1   0   0   0   0
   0   1   0   0   0   0   1   0
   0   0   0   0   0   0   0   0
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00020  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst pmse  =   0.00020000  (meets spec limit 0.06)
Overall mse =   0.00001094  (meets spec limit 0.02)

Mean errors:
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00020  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst mean error   =   0.00020000  (meets spec limit 0.015)
Overall mean error =   0.00001094  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



-------------------------------------------------------
IEEE-1180 test: [idct_ap922x87.c] 'AP922float iDCT'
-------------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = -1, #iters = 10000
Peak absolute values of errors:
   0   1   0   0   0   0   0   0
   0   1   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst pmse  =   0.00010000  (meets spec limit 0.06)
Overall mse =   0.00000313  (meets spec limit 0.02)

Mean errors:
  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst mean error   =   0.00010000  (meets spec limit 0.015)
Overall mean error =   0.00000313  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



-------------------------------------------------------
IEEE-1180 test: [idct_ap922x87.c] 'AP922float iDCT'
-------------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   1   0
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000
Worst pmse  =   0.00010000  (meets spec limit 0.06)
Overall mse =   0.00000313  (meets spec limit 0.02)

Mean errors:
  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000
Worst mean error   =   0.00010000  (meets spec limit 0.015)
Overall mean error =   0.00000313  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



-------------------------------------------------------
IEEE-1180 test: [idct_ap922x87.c] 'AP922float iDCT'
-------------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = -1, #iters = 10000
Peak absolute values of errors:
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   1   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst pmse  =   0.00010000  (meets spec limit 0.06)
Overall mse =   0.00000156  (meets spec limit 0.02)

Mean errors:
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
 -0.00010  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
Worst mean error   =   0.00010000  (meets spec limit 0.015)
Overall mean error =  -0.00000156  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero


Profile: Function timing, sorted by time
Date:    Mon Sep 04 21:45:02 2000


Program Statistics
------------------
    Command line at 2000 Sep 04 21:44: "C:\work\proj\ieee1180\Debug\ieee1180" -256 255 -1 10000
    Total time: 6463.855 millisecond
    Time outside of functions: 4.995 millisecond
    Call depth: 3
    Total functions: 19
    Total hits: 670010
    Function coverage: 52.6%
    Overhead Calculated 6
    Overhead Average 6

Module Statistics for ieee1180.exe
----------------------------------
    Time in module: 6458.860 millisecond
    Percent of time in module: 100.0%
    Functions in module: 19
    Hits in module: 670010
    Module function coverage: 52.6%

        Func          Func+Child           Hit
        Time   %         Time      %      Count  Function
---------------------------------------------------------
    2717.382  42.1     2717.382  42.1    10000 _fdct_reference (ieeetest.obj)
    2643.590  40.9     2643.590  40.9    10000 _idct_reference (ieeetest.obj)
     508.263   7.9      508.263   7.9   640000 _ieeerand (ieeetest.obj)
     349.276   5.4     6458.860 100.0        1 _main (ieeetest.obj)
     239.319   3.7      239.319   3.7    10000 _idct_ap922float_x87 (idct_ap922x87.obj)
       0.509   0.0        0.509   0.0        1 _fdct_int (fdct_int.obj)
       0.321   0.0        0.515   0.0        1 _initialize_dcts (ieeetest.obj)
       0.159   0.0        0.159   0.0        1 _ref_dct_init (ieeetest.obj)
       0.035   0.0        0.035   0.0        1 _init_idct_int (idct_int.obj)
       0.006   0.0        0.006   0.0        5 _meets (ieeetest.obj)
^^ AMD K6/2-500

