
--------------------------------------------------------
IEEE-1180 test: [idct_ap922hybr.c] 'AP922hybrid iDCT x87'
--------------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00040  0.00100  0.00080  0.00100  0.00030  0.00110  0.00070  0.00150
  0.00110  0.00100  0.00100  0.00100  0.00090  0.00200  0.00130  0.00120
  0.00070  0.00090  0.00080  0.00080  0.00100  0.00120  0.00150  0.00060
  0.00090  0.00110  0.00080  0.00120  0.00060  0.00110  0.00110  0.00190
  0.00070  0.00120  0.00100  0.00050  0.00060  0.00130  0.00090  0.00180
  0.00110  0.00110  0.00080  0.00120  0.00140  0.00100  0.00130  0.00170
  0.00120  0.00080  0.00140  0.00070  0.00120  0.00090  0.00100  0.00080
  0.00130  0.00100  0.00080  0.00080  0.00080  0.00090  0.00170  0.00080
Worst pmse  =   0.00200000  (meets spec limit 0.06)
Overall mse =   0.00103437  (meets spec limit 0.02)

Mean errors:
  0.00020  0.00040  0.00000  0.00060  0.00030 -0.00010 -0.00070  0.00010
 -0.00030 -0.00060 -0.00020  0.00020 -0.00030 -0.00060 -0.00030 -0.00020
 -0.00030 -0.00010 -0.00020  0.00000  0.00000 -0.00020 -0.00010 -0.00040
 -0.00050  0.00050 -0.00040  0.00040  0.00000 -0.00030  0.00030  0.00010
 -0.00050 -0.00020  0.00000 -0.00010  0.00040 -0.00050 -0.00010  0.00020
  0.00050  0.00010  0.00000 -0.00040 -0.00020 -0.00020 -0.00010 -0.00010
  0.00000 -0.00040 -0.00060  0.00050  0.00020 -0.00070 -0.00040 -0.00040
  0.00030  0.00000  0.00020  0.00000  0.00000  0.00030 -0.00030  0.00000
Worst mean error   =   0.00070000  (meets spec limit 0.015)
Overall mean error =  -0.00008125  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



--------------------------------------------------------
IEEE-1180 test: [idct_ap922hybr.c] 'AP922hybrid iDCT x87'
--------------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   0   0   0   1   0   1   0
   0   0   1   0   0   0   0   0
   0   0   0   1   1   0   0   0
   0   0   1   0   1   0   1   0
   1   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   1   1   0   0
   0   0   0   0   0   1   0   0
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00020  0.00000  0.00000  0.00000  0.00010  0.00000  0.00010  0.00000
  0.00000  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00010  0.00010  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00010  0.00000  0.00010  0.00000  0.00010  0.00000
  0.00020  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00010  0.00020  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000  0.00000
Worst pmse  =   0.00020000  (meets spec limit 0.06)
Overall mse =   0.00002500  (meets spec limit 0.02)

Mean errors:
  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000 -0.00010  0.00000
  0.00000  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00010  0.00010  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00010  0.00000  0.00010  0.00000 -0.00010  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000 -0.00010  0.00000  0.00000
Worst mean error   =   0.00010000  (meets spec limit 0.015)
Overall mean error =   0.00000625  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



--------------------------------------------------------
IEEE-1180 test: [idct_ap922hybr.c] 'AP922hybrid iDCT x87'
--------------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00110  0.00110  0.00120  0.00110  0.00080  0.00100  0.00110  0.00120
  0.00120  0.00060  0.00080  0.00070  0.00120  0.00100  0.00120  0.00100
  0.00120  0.00130  0.00130  0.00120  0.00090  0.00100  0.00080  0.00150
  0.00100  0.00070  0.00100  0.00090  0.00080  0.00100  0.00090  0.00090
  0.00100  0.00060  0.00090  0.00030  0.00070  0.00150  0.00090  0.00090
  0.00110  0.00050  0.00100  0.00090  0.00080  0.00040  0.00040  0.00100
  0.00120  0.00140  0.00130  0.00110  0.00110  0.00090  0.00090  0.00090
  0.00100  0.00070  0.00070  0.00120  0.00080  0.00130  0.00060  0.00130
Worst pmse  =   0.00150000  (meets spec limit 0.06)
Overall mse =   0.00096875  (meets spec limit 0.02)

Mean errors:
 -0.00070  0.00010  0.00000 -0.00010  0.00000 -0.00020  0.00010 -0.00060
  0.00020 -0.00040  0.00000 -0.00030  0.00100 -0.00060  0.00000  0.00000
 -0.00020 -0.00050  0.00010 -0.00020 -0.00010 -0.00060  0.00040  0.00030
  0.00040 -0.00030  0.00040  0.00050  0.00000 -0.00060  0.00030  0.00030
 -0.00020  0.00020 -0.00010  0.00010 -0.00050  0.00050 -0.00010 -0.00010
  0.00050  0.00010  0.00020  0.00010  0.00040 -0.00020  0.00000 -0.00020
 -0.00060 -0.00040 -0.00050 -0.00030 -0.00010  0.00050 -0.00010 -0.00090
 -0.00020 -0.00010  0.00010  0.00040  0.00020  0.00050  0.00020  0.00050
Worst mean error   =   0.00100000  (meets spec limit 0.015)
Overall mean error =  -0.00002188  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



--------------------------------------------------------
IEEE-1180 test: [idct_ap922hybr.c] 'AP922hybrid iDCT x87'
--------------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00040  0.00100  0.00080  0.00100  0.00030  0.00110  0.00070  0.00150
  0.00110  0.00110  0.00100  0.00100  0.00090  0.00200  0.00130  0.00120
  0.00070  0.00090  0.00080  0.00080  0.00100  0.00120  0.00150  0.00060
  0.00090  0.00110  0.00080  0.00120  0.00060  0.00110  0.00110  0.00190
  0.00070  0.00120  0.00100  0.00050  0.00060  0.00130  0.00090  0.00170
  0.00110  0.00110  0.00080  0.00120  0.00140  0.00100  0.00130  0.00170
  0.00120  0.00080  0.00140  0.00070  0.00120  0.00090  0.00100  0.00080
  0.00130  0.00100  0.00080  0.00080  0.00080  0.00090  0.00170  0.00080
Worst pmse  =   0.00200000  (meets spec limit 0.06)
Overall mse =   0.00103437  (meets spec limit 0.02)

Mean errors:
 -0.00020 -0.00040  0.00000 -0.00060 -0.00030  0.00010  0.00070 -0.00010
  0.00030  0.00070  0.00020 -0.00020  0.00030  0.00060  0.00030  0.00020
  0.00030  0.00010  0.00020  0.00000  0.00000  0.00020  0.00010  0.00040
  0.00050 -0.00050  0.00040 -0.00040  0.00000  0.00030 -0.00030 -0.00010
  0.00050  0.00020  0.00000  0.00010 -0.00040  0.00050  0.00010 -0.00030
 -0.00050 -0.00010  0.00000  0.00040  0.00020  0.00020  0.00010  0.00010
  0.00000  0.00040  0.00060 -0.00050 -0.00020  0.00070  0.00040  0.00040
 -0.00030  0.00000 -0.00020  0.00000  0.00000 -0.00030  0.00030  0.00000
Worst mean error   =   0.00070000  (meets spec limit 0.015)
Overall mean error =   0.00008125  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



--------------------------------------------------------
IEEE-1180 test: [idct_ap922hybr.c] 'AP922hybrid iDCT x87'
--------------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   0   0   0   1   0   1   0
   0   0   1   0   0   0   0   0
   0   0   0   1   1   0   0   0
   0   0   0   0   1   0   1   0
   1   0   0   0   0   0   0   0
   0   0   0   0   0   0   0   0
   0   0   0   0   0   1   0   0
   0   0   1   0   0   1   0   0
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00010  0.00000  0.00000  0.00000  0.00010  0.00000  0.00010  0.00000
  0.00000  0.00000  0.00010  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00010  0.00010  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000  0.00010  0.00000
  0.00020  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000  0.00000
  0.00000  0.00000  0.00010  0.00000  0.00000  0.00010  0.00000  0.00000
Worst pmse  =   0.00020000  (meets spec limit 0.06)
Overall mse =   0.00002031  (meets spec limit 0.02)

Mean errors:
  0.00010  0.00000  0.00000  0.00000 -0.00010  0.00000  0.00010  0.00000
  0.00000  0.00000 -0.00010  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000 -0.00010 -0.00010  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000 -0.00010  0.00000  0.00010  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000  0.00000
  0.00000  0.00000  0.00000  0.00000  0.00000  0.00010  0.00000  0.00000
  0.00000  0.00000  0.00010  0.00000  0.00000  0.00010  0.00000  0.00000
Worst mean error   =   0.00010000  (meets spec limit 0.015)
Overall mean error =   0.00000156  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero



--------------------------------------------------------
IEEE-1180 test: [idct_ap922hybr.c] 'AP922hybrid iDCT x87'
--------------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
  0.00110  0.00110  0.00120  0.00110  0.00080  0.00100  0.00110  0.00130
  0.00120  0.00060  0.00080  0.00070  0.00130  0.00100  0.00120  0.00100
  0.00110  0.00130  0.00130  0.00120  0.00090  0.00100  0.00080  0.00160
  0.00100  0.00070  0.00100  0.00090  0.00080  0.00100  0.00090  0.00090
  0.00100  0.00060  0.00090  0.00030  0.00070  0.00150  0.00090  0.00090
  0.00110  0.00050  0.00100  0.00090  0.00080  0.00040  0.00040  0.00100
  0.00120  0.00140  0.00140  0.00110  0.00110  0.00090  0.00090  0.00090
  0.00100  0.00060  0.00070  0.00120  0.00080  0.00130  0.00060  0.00130
Worst pmse  =   0.00160000  (meets spec limit 0.06)
Overall mse =   0.00097187  (meets spec limit 0.02)

Mean errors:
  0.00070 -0.00010  0.00000  0.00010  0.00000  0.00020 -0.00010  0.00070
 -0.00020  0.00040  0.00000  0.00030 -0.00090  0.00060  0.00000  0.00000
  0.00030  0.00050 -0.00010  0.00020  0.00010  0.00060 -0.00040 -0.00040
 -0.00040  0.00030 -0.00040 -0.00050  0.00000  0.00060 -0.00030 -0.00030
  0.00020 -0.00020  0.00010 -0.00010  0.00050 -0.00050  0.00010  0.00010
 -0.00050 -0.00010 -0.00020 -0.00010 -0.00040  0.00020  0.00000  0.00020
  0.00060  0.00040  0.00040  0.00030  0.00010 -0.00050  0.00010  0.00090
  0.00020  0.00020 -0.00010 -0.00040 -0.00020 -0.00050 -0.00020 -0.00050
Worst mean error   =   0.00090000  (meets spec limit 0.015)
Overall mean error =   0.00002500  (meets spec limit 0.0015)

iDCT output range check {-256,+255} : pass

0 elements of IDCT(0) were not zero


Profile: Function timing, sorted by time
Date:    Mon Sep 04 21:33:05 2000


Program Statistics
------------------
    Command line at 2000 Sep 04 21:32: "C:\work\proj\ieee1180\Debug\ieee1180" -256 255 -1 10000
    Total time: 6452.921 millisecond
    Time outside of functions: 4.986 millisecond
    Call depth: 3
    Total functions: 19
    Total hits: 670010
    Function coverage: 52.6%
    Overhead Calculated 6
    Overhead Average 6

Module Statistics for ieee1180.exe
----------------------------------
    Time in module: 6447.935 millisecond
    Percent of time in module: 100.0%
    Functions in module: 19
    Hits in module: 670010
    Module function coverage: 52.6%

        Func          Func+Child           Hit
        Time   %         Time      %      Count  Function
---------------------------------------------------------
    2717.322  42.1     2717.322  42.1    10000 _fdct_reference (ieeetest.obj)
    2634.050  40.9     2634.050  40.9    10000 _idct_reference (ieeetest.obj)
     512.273   7.9      512.273   7.9   640000 _ieeerand (ieeetest.obj)
     339.142   5.3     6447.935 100.0        1 _main (ieeetest.obj)
     244.629   3.8      244.629   3.8    10000 _idct_ap922hybr_x87 (idct_ap922hybr.obj)
       0.300   0.0        0.502   0.0        1 _initialize_dcts (ieeetest.obj)
       0.168   0.0        0.168   0.0        1 _ref_dct_init (ieeetest.obj)
       0.034   0.0        0.034   0.0        1 _init_idct_int (idct_int.obj)
       0.010   0.0        0.010   0.0        1 _fdct_int (fdct_int.obj)
       0.007   0.0        0.007   0.0        5 _meets (ieeetest.obj)
^^ AMD K6/2-500
