
---------------------------------------------------
IEEE-1180 test#1, for [idctchen.c] 'MMX16 Chen1 IDCT'
---------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0365   0.0448   0.0380   0.0367   0.0328   0.0435   0.0445   0.0363
   0.0411   0.0455   0.0401   0.0382   0.0373   0.0470   0.0460   0.0406
   0.0385   0.0464   0.0386   0.0357   0.0410   0.0444   0.0463   0.0374
   0.0405   0.0475   0.0385   0.0363   0.0347   0.0432   0.0438   0.0367
   0.0412   0.0498   0.0391   0.0371   0.0355   0.0414   0.0454   0.0401
   0.0393   0.0452   0.0419   0.0377   0.0383   0.0446   0.0511   0.0374
   0.0469   0.0438   0.0434   0.0386   0.0408   0.0383   0.0465   0.0379
   0.0396   0.0483   0.0386   0.0363   0.0370   0.0415   0.0455   0.0343
Worst pmse = 0.051100  (meets spec limit 0.06)
Overall mse = 0.040950  (FAILS spec limit 0.02)

Mean errors:
  -0.0087   0.0284   0.0108   0.0081   0.0054   0.0223   0.0271   0.0079
   0.0157   0.0199   0.0143   0.0064   0.0101   0.0196   0.0254   0.0076
  -0.0097   0.0286   0.0070   0.0061   0.0064   0.0208   0.0233   0.0074
  -0.0309   0.0365   0.0033   0.0091   0.0051   0.0198   0.0286   0.0059
  -0.0198   0.0336   0.0029   0.0079   0.0053   0.0212   0.0254   0.0099
   0.0113   0.0254   0.0121   0.0065   0.0079   0.0176   0.0321   0.0078
   0.0313   0.0182   0.0178   0.0030   0.0096   0.0189   0.0301   0.0073
  -0.0206   0.0321   0.0064   0.0071   0.0066   0.0155   0.0293   0.0049
Worst mean error = 0.036500  (FAILS spec limit 0.015)
Overall mean error = 0.012691  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test#2, for [idctchen.c] 'MMX16 Chen1 IDCT'
---------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0442   0.0412   0.0394   0.0415   0.0345   0.0376   0.0441   0.0375
   0.0383   0.0485   0.0408   0.0381   0.0385   0.0440   0.0456   0.0356
   0.0411   0.0474   0.0423   0.0405   0.0374   0.0454   0.0446   0.0381
   0.0341   0.0449   0.0369   0.0392   0.0373   0.0385   0.0434   0.0358
   0.0301   0.0420   0.0376   0.0377   0.0351   0.0430   0.0450   0.0349
   0.0451   0.0474   0.0417   0.0356   0.0395   0.0438   0.0439   0.0362
   0.0431   0.0430   0.0407   0.0343   0.0382   0.0411   0.0449   0.0398
   0.0403   0.0451   0.0391   0.0332   0.0340   0.0447   0.0417   0.0364
Worst pmse = 0.048500  (meets spec limit 0.06)
Overall mse = 0.040227  (FAILS spec limit 0.02)

Mean errors:
   0.0248   0.0206   0.0146   0.0025   0.0101   0.0206   0.0293   0.0077
   0.0061   0.0253   0.0096   0.0017   0.0081   0.0196   0.0258   0.0092
  -0.0081   0.0286   0.0091   0.0059   0.0060   0.0228   0.0268   0.0083
  -0.0047   0.0299   0.0045   0.0082   0.0073   0.0193   0.0258   0.0092
  -0.0029   0.0258   0.0088   0.0081   0.0097   0.0188   0.0286   0.0067
   0.0279   0.0188   0.0125   0.0056   0.0149   0.0234   0.0263   0.0070
   0.0253   0.0198   0.0147   0.0047   0.0080   0.0191   0.0261   0.0116
  -0.0239   0.0317   0.0011   0.0076   0.0074   0.0217   0.0239   0.0078
Worst mean error = 0.031700  (FAILS spec limit 0.015)
Overall mean error = 0.013767  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test#3, for [idctchen.c] 'MMX16 Chen1 IDCT'
---------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0338   0.0405   0.0349   0.0302   0.0307   0.0338   0.0388   0.0318
   0.0337   0.0370   0.0349   0.0321   0.0340   0.0358   0.0441   0.0351
   0.0317   0.0385   0.0364   0.0341   0.0350   0.0368   0.0425   0.0355
   0.0360   0.0425   0.0360   0.0313   0.0308   0.0346   0.0362   0.0310
   0.0310   0.0413   0.0311   0.0301   0.0284   0.0334   0.0391   0.0353
   0.0326   0.0383   0.0363   0.0312   0.0313   0.0383   0.0371   0.0341
   0.0402   0.0309   0.0353   0.0342   0.0321   0.0380   0.0380   0.0330
   0.0349   0.0428   0.0324   0.0318   0.0311   0.0341   0.0378   0.0306
Worst pmse = 0.044100  (meets spec limit 0.06)
Overall mse = 0.034941  (FAILS spec limit 0.02)

Mean errors:
  -0.0110   0.0271   0.0051   0.0082   0.0055   0.0184   0.0242   0.0068
   0.0167   0.0208   0.0149   0.0013   0.0088   0.0156   0.0281   0.0057
  -0.0073   0.0221   0.0070   0.0083   0.0062   0.0198   0.0255   0.0061
  -0.0258   0.0325   0.0038   0.0065   0.0036   0.0170   0.0198   0.0072
  -0.0176   0.0283   0.0063   0.0041   0.0042   0.0164   0.0239   0.0083
   0.0094   0.0221   0.0111   0.0040   0.0057   0.0165   0.0197   0.0043
   0.0268   0.0105   0.0119   0.0034   0.0067   0.0172   0.0230   0.0072
  -0.0201   0.0258   0.0034   0.0058   0.0021   0.0167   0.0228   0.0044
Worst mean error = 0.032500  (FAILS spec limit 0.015)
Overall mean error = 0.010669  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test#4, for [idctchen.c] 'MMX16 Chen1 IDCT'
---------------------------------------------------
IEEE test conditions: -L = -256, +H = 255, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0352   0.0477   0.0392   0.0356   0.0335   0.0448   0.0457   0.0362
   0.0435   0.0456   0.0438   0.0349   0.0384   0.0445   0.0486   0.0381
   0.0381   0.0488   0.0411   0.0376   0.0411   0.0434   0.0451   0.0392
   0.0440   0.0481   0.0375   0.0367   0.0359   0.0447   0.0446   0.0374
   0.0398   0.0454   0.0403   0.0366   0.0357   0.0417   0.0417   0.0410
   0.0369   0.0466   0.0398   0.0394   0.0396   0.0460   0.0474   0.0388
   0.0457   0.0423   0.0435   0.0390   0.0385   0.0455   0.0507   0.0378
   0.0447   0.0484   0.0395   0.0363   0.0363   0.0402   0.0418   0.0323
Worst pmse = 0.050700  (meets spec limit 0.06)
Overall mse = 0.041216  (FAILS spec limit 0.02)

Mean errors:
  -0.0098   0.0283   0.0052   0.0050   0.0059   0.0220   0.0255   0.0052
   0.0205   0.0256   0.0138   0.0051   0.0062   0.0213   0.0282   0.0077
  -0.0061   0.0322   0.0093   0.0120   0.0107   0.0192   0.0257   0.0076
  -0.0330   0.0335   0.0033   0.0119   0.0023   0.0225   0.0230   0.0032
  -0.0184   0.0302   0.0033   0.0088   0.0067   0.0227   0.0251   0.0064
   0.0039   0.0200   0.0106   0.0026   0.0092   0.0210   0.0254   0.0096
   0.0303   0.0175   0.0179   0.0056   0.0133   0.0185   0.0319   0.0088
  -0.0261   0.0340   0.0031   0.0083   0.0051   0.0198   0.0222   0.0061
Worst mean error = 0.034000  (FAILS spec limit 0.015)
Overall mean error = 0.012444  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test#5, for [idctchen.c] 'MMX16 Chen1 IDCT'
---------------------------------------------------
IEEE test conditions: -L = -5, +H = 5, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0381   0.0427   0.0392   0.0370   0.0386   0.0410   0.0460   0.0345
   0.0389   0.0450   0.0414   0.0396   0.0388   0.0430   0.0475   0.0399
   0.0405   0.0474   0.0406   0.0343   0.0391   0.0416   0.0453   0.0388
   0.0341   0.0387   0.0396   0.0383   0.0370   0.0443   0.0424   0.0326
   0.0337   0.0424   0.0381   0.0348   0.0369   0.0437   0.0418   0.0372
   0.0477   0.0478   0.0391   0.0370   0.0351   0.0402   0.0453   0.0374
   0.0463   0.0411   0.0451   0.0349   0.0400   0.0436   0.0477   0.0382
   0.0427   0.0498   0.0392   0.0366   0.0366   0.0413   0.0446   0.0344
Worst pmse = 0.049800  (meets spec limit 0.06)
Overall mse = 0.040408  (FAILS spec limit 0.02)

Mean errors:
   0.0227   0.0197   0.0164   0.0054   0.0086   0.0216   0.0290   0.0099
   0.0069   0.0262   0.0094   0.0068   0.0092   0.0180   0.0277   0.0045
  -0.0057   0.0302   0.0102   0.0067   0.0015   0.0196   0.0253   0.0026
  -0.0021   0.0221   0.0100   0.0055   0.0050   0.0203   0.0270   0.0072
  -0.0031   0.0250   0.0119   0.0060   0.0051   0.0227   0.0268   0.0072
   0.0299   0.0192   0.0157   0.0022   0.0103   0.0126   0.0285   0.0074
   0.0283   0.0173   0.0199   0.0029   0.0108   0.0210   0.0291   0.0090
  -0.0279   0.0360   0.0060   0.0108   0.0036   0.0205   0.0270   0.0042
Worst mean error = 0.036000  (FAILS spec limit 0.015)
Overall mean error = 0.013645  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero



---------------------------------------------------
IEEE-1180 test#6, for [idctchen.c] 'MMX16 Chen1 IDCT'
---------------------------------------------------
IEEE test conditions: -L = -300, +H = 300, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0316   0.0401   0.0343   0.0307   0.0303   0.0336   0.0389   0.0303
   0.0350   0.0390   0.0359   0.0299   0.0359   0.0351   0.0398   0.0335
   0.0317   0.0367   0.0340   0.0343   0.0360   0.0358   0.0403   0.0343
   0.0372   0.0444   0.0325   0.0279   0.0311   0.0346   0.0399   0.0291
   0.0286   0.0438   0.0329   0.0308   0.0278   0.0335   0.0388   0.0325
   0.0310   0.0387   0.0397   0.0348   0.0334   0.0363   0.0388   0.0324
   0.0391   0.0338   0.0378   0.0327   0.0330   0.0377   0.0435   0.0351
   0.0342   0.0444   0.0347   0.0301   0.0314   0.0344   0.0383   0.0327
Worst pmse = 0.044400  (meets spec limit 0.06)
Overall mse = 0.035006  (FAILS spec limit 0.02)

Mean errors:
  -0.0070   0.0239   0.0055   0.0031   0.0085   0.0186   0.0241   0.0069
   0.0162   0.0146   0.0105   0.0045   0.0105   0.0147   0.0214   0.0067
  -0.0067   0.0233   0.0072   0.0057   0.0042   0.0174   0.0237   0.0043
  -0.0234   0.0314   0.0031   0.0045   0.0029   0.0192   0.0223   0.0047
  -0.0126   0.0306   0.0019   0.0088   0.0032   0.0165   0.0212   0.0061
   0.0064   0.0201   0.0097   0.0066   0.0070   0.0153   0.0240   0.0098
   0.0235   0.0164   0.0160   0.0017   0.0086   0.0169   0.0261   0.0079
  -0.0190   0.0312   0.0055   0.0065   0.0058   0.0180   0.0209   0.0079
Worst mean error = 0.031400  (FAILS spec limit 0.015)
Overall mean error = 0.010859  (FAILS spec limit 0.0015)

0 elements of IDCT(0) were not zero


