Hola Bob,
Installed: Pedal box, master cylinder, steering rack w/ shafts (need an adaptor
from shaft to rack), control arms, Koni shocks & coil over springs, front rotors,
brake callipers, front spindles with hubs, tie rod ends, and custom steering
axis inclination (SAI) kit that greatly improves front suspension geometry.
Went pretty easy .. mostly bolt on stuff.
Sway bar kit install was started but had to stop because no instructions; need
to look for pics from other builds.
Next is to run front brake lines and install foot boxes.
I previously spent days and days on the trunk floor because I made custom
storage bins with hinged covers (pics will explain), and a tunnel for fuel
tank filler pipe. ~George
|