Wood
Siding Options |
|
|||||
|
Wood is a perennial favorite choice for siding throughout the United States and Canada. Whether it is vertical siding like board and batten, or horizontal siding like clapboards, shakes, and shingles, there are a few species and grades that are commonly used for all applications. A local builder or installer knows what species are readily available in the regional market. Setting your sights on wood that comes from a distance, is not frequently harvested, or is not suited to your region, could hold up a project and raise the budget considerably. Before settling on a siding material, ask questions about rot resistance, splitting, checking, or cupping. A good rule of thumb is to buy the best grade of siding you can afford. Look for clear grains whenever possible, and make certain that the wood acclimates on site, is properly sealed, and is thoroughly protected upon installation. Pine |
|||||
preferable when painting or staining horizontal siding. It is typically used for clapboards, but some contractors are wary of fast-growth pine for siding because it can be prone to cupping, splitting, and checking. Pine is not a rot-resistant wood, so it is important to keep it sealed and well maintained. Spruce |
||||||
|
Fir
Like pine and spruce, fir is used as an economical siding option. It comes in long lengths, is easy to cut and install, takes a finish well, and is readily available regionally in the West. Like the other softwoods, fir is easily milled to a pattern, be it shiplap, tongue-and-groove, or board-and-batten. Cedar |
||
Redwood Perhaps the hallmark of rich texture and tone, redwood is a good choice for siding in all climates. Redwood resists shrinking, so it holds its profile and keeps its joints with little warping or cupping. Redwood has little pitch or resin, so it absorbs and retains its finish very well and requires less maintenance than some other species. Redwood is also naturally insect resistant, not just on the face but throughout the wood. Grown in the West, redwood can be difficult to obtain in other regions. |
|||
|
Price
and Options
Wood pricing varies depending on the market. It may be difficult to get some native western woods on the East Coast, for example, because consumers buy it up in the local markets. And because some woods cannot be harvested as quickly as others, the supply is naturally lower. Check with your builder or local lumberyard before making a final decision. Some companies offer pre-primed planks, shakes, and shingles. These boards come primed on one or both faces, and are sealed and protected from the minute they arrive on site. These boards and shingles may be dipped or factory coated. Before installing, make sure that edges and ends are properly sealed. Freshly cut ends must always be primed and sealed before nailing. A
good wood siding should last for many, many years, but it must be properly
maintained. Proper maintenance includes power washing, staining and sealing
whenever the heat of the sun fades the finish, or moisture starts to turn
to mold or mildew. Always allow wood to dry well before applying a new
stain or finish. |
All
About Dol | What's New | Contact
| Sitemap | Link
Copyright Sudprasert Engineering (C)2002
10 February, 2003