DIPPING (DIPPING) IS THE PROCESS THAT MOULD OR WORKPIECE ARE DIPPED  IN THE RESIN PASTE CALLED "DIP MOLDING" AND "DIP COATING"

DIP COATING

MOLDING PROCESS IS NECESSARY TO USE MOULD FOR RESIN ADHESION. BUT COATING PROCESS USE WORKPIECE FOR DIPPING ING RESIN WHICH IS SOL COATING OR POWDER COATING.

^{SOL COATING}

VINYL CHLORIDE WILL ADHERE AT WORKPIECE CONNECTING WITH METAL JIG. THE THICKNESS IS 0.8 - 5.0 MM.

^{POWDER COATING}

BESIDES OF VINYL CHLORIDE, WE ALSO DIP THE PREHEAT WORKPIECE IN AIR-FLUIDITY POLYETHYLENE OR NYLON POWER ETC. THE THICKNESS IS 0.3 - 0.6 MM.

CHARACTERS

1.COMPARING WITH GENERAL PAINT, IN COATING PROCESS WE CAN SET THE THICKNESS. THE SURFACE ALSO SOFT AND LUSTERED.

2.BE BETTER IN ADHESION

3.DUST PROOF, SPOIL PROTECTION. AND GOOD FOR INSULATOR.

MAIN USE

PLATE HANGER, HARNESS CLIP, TOOL GRIP, WIRING CLIP, MEDICAL EQUIPMENT, FILTRATION PLANT, SHOWCASE, FENCE.