= HF8V = / = SP8WJT = / = SP0106RZ =

HF-10040


PROJECT: HF-10040
DESCRIPTION: Standard for UART interface


Standard Info

This standard for UART interface is widely used. Althought is some my devices target system was made as female 4x1 goldpin connector, in such case cable HF-70195 can be used to convert it to "right" standard. RXD and TXD lines must be crossed. In some chinese devices terminals are marked as distant signal (HF-17852), while normally it should be local input/output. This can lead to connecting errors.


HF-10040 Interface pinning

VCC RXD TXD GND

as seen from element side

Key: VCC must be clearly marked with red paint on both sides of connectors.



Usage of HF-10040 interface in projects

PROJECTTYPEREMARKS
HF-17852 M RS-232 to UART converter
HF-17855 M USB to UART converter
HF-6014 F Digital system
HF-6045 M Remote LCD Display
HF-6030 F Digital system
HF-6099 F Digital system
HF-60104 F Digital system
HF-60132 F EEPROM Reader/Writer
HF-60215 F Experimental project
HF-60247 F Extension board
HF-60259 F Extension board
HF-60270 F Extension board
HF-60271 F Extension board
HF-60599 F Extension board
HF-6128 F Digital system
HF-6158 F Digital system
HF-70195 M/F Cable


Prefix 10

HF Register

Microcontrollers in my constructions

Electronics

Main Page